dc.description.abstract |
Climate change is an inevitable global issue with long term consequences for the
sustainable development. It is a crucial time to review this climate issue with
ensured determination. There is a need and demand for alternative sources to
generate power rather than the conventional burning of fuels due to impact on
environment. Renewable energy sources are those natural reserves that are
refilled continually, including wind, solar, biomass and geothermal. A number of
technologies have been developed to use solar energy for power generation.
Among them, an important feature of concentrated solar power plants is the
potential to incorporate thermal storage. Thermal energy storage allows
generation beyond sunset and in times of cloud cover. Several possibilities for
heat transfer fluid and thermal energy storage have been identified. From a wide
range of materials, molten nitrate salt is selected because of adequate heat
storage and transfer capability. Different approaches to prolong life by
suppressing corrosion have been suggested in the literature, coating is a
promising option because coatings are believed to provide shield to suppress
corrosion. Among different coatings, nickel aluminide has been claimed to
possess high-temperature mechanical strength and it has a remarkable oxidation
resistance performance as substrate component. Moreover, nickel aluminide has
low solubility in the molten nitrate salt. Ni₃Al coatings are much preferred to be
used as corrosion resistant coatings as they possess strength at high
temperature, oxidation protection and creep properties. Among different
deposition techniques, plasma spray has been identified as most applicable
because it is versatile, adaptable, cost effective. It also has high deposition rate,
deposition efficiency and less environmental impact, more importantly it is easy
to scale up.
Corrosion behaviour of stainless steel 347 (SS347) and Ni₃Al coated SS347 was
investigated in molten nitrate salt (60wt% NaNO₃ + 40wt% KNO₃) immersion at
565oC for 500 hours intervals up to 3000 hours. A growth of stratified oxide layers
was observed on SS347 sample surface comprising of NaFeO₂ , Fe₂ O₃ and
Fe₃O₄ . The Ni₃Al coated SS347 samples were observed to undergo rapid
oxidation within first 500 hours. Apparent Mass change for bare SS347 was 4
mg/cm²/yr, equivalent to oxide growth rate of ~ 5 µm/yr. Mass change for Ni₃Al
coated SS347 was 29.8 mg/cm²/yr, equivalent to oxide growth rate of ~ 44.6
μm/yr for first 500 hours and 0.5 mg/cm²/yr, equivalent to oxide growth rate of ~
0.7 μm/yr for 500 to 3000 hours. The results presented in this study suggest that
Ni3Al coating supresses the formation of oxide layers on the surface of stainless-
steel substrates and can be used to suppress corrosion in presence of molten
nitrate salts. The fact, that Ni₃Al coated SS347 gives mass change of one order
of magnitude lower than the bare SS347, it means that these coatings can be
used to prolong the lifetime of bare SS347 in molten nitrate salt at 565oC, which
is of relevance to thermal energy storage applications.
The Engineering Doctorate portfolio is structured as an innovation report and five
submissions. A personal profile and a report on international industrial placement
are also included in the portfolio. |
en_UK |