Browsing School of Applied Sciences (SAS) (2006-July 2014) by Title

Browsing School of Applied Sciences (SAS) (2006-July 2014) by Title

Sort by: Order: Results:

  • Dutta, S.; Parsons, Simon A.; Bhattacharjee, C.; Jarvis, Peter; Datta, S.; Bandyopadhyay, S. (Elsevier, 2009-12-15)
    Recycling and reuse of wastewater after purification will reduce the environmental pollution as well as fulfill the increasing demand of water. Adsorption-based water treatment process is very popular for dye-house wastewater ...
  • Battat, J.; Huang, Zhaorong; Donohue, P. P.; Todd, M. A.; Whatmore, Roger W. (Taylor and Francis, 2004)
    The phase transformations from amorphous to pyrochlore to perovskite in lead scandium tantalate (PST) thin films during rapid thermal annealing process (RTA) have been studied. Volume fractions for pyrochlore and perovskite ...
  • Le Corre, Kristell S.; Valsami-Jones, Eugenia; Hobbs, Phil; Parsons, Simon A. (Taylor & Francis, 2007-12-31)
    The presence of white deposits in specific areas of wastewater treatment plants is generally the consequence of the spontaneous formation of a mineral called struvite. Struvite forms when the levels of phosphate, ammonium ...
  • Dayan, Rony; Evans, Stephen (Emerald, 2006)
    The purpose of this paper is to describe two related fields – knowledge management (KM) and capability maturity model integrated (CMMISM) – and highlight their similarities.
  • Al-Ashaab, Ahmed; Molyneaux, M.; Doultsinou, A.; Brunner, B.; Martínez, E.; Moliner, F.; Santamaría, V.; Tanjore, D.; Ewers, P.; Knight, G. (Elsevier Science B.V., Amsterdam., 2012-02-01)
    A knowledge-based environment to support product design validation of refresh projects (projects with minor changes in comparison with previous ones) has been developed. This was achieved by capturing the relation between ...
  • Sun, Xiaofeng. (Cranfield University, 2011-12)
    The Laser Beam Welding (LBW) process offers the possibility of manufacturing joints from most light metals and their combinations, as well as simplifying and integrating the fuselage structure to reduce weight and cost, ...
  • Haji, M. (Cranfield University, 2006-09)
    This thesis project has sought to investigate the major factors affecting knowledge sharing in organisations. Research into existing studies and findings from an industrial survey highlighted that there are major areas ...
  • Skandalakis, Alexandros (Cranfield University, 1999-04)
    This thesis illustrates that didactic and gnostic practices, identified through a structured Knowledge Transfer Framework, can effect business improvement in Small and Medium-sized Enterprises. Small and Medium-sized ...
  • Quansah, C. (Cranfield University, 1982-04)
    Since Ellison (1947) described the process of erosion as comprising a) the detachment of soil particles from the soil mass by raindrop impact, b) detachment by runoff, c) the transport of the detached particles by ...
  • Ball, Vincent; Lustig, Ariel; Ramsden, Jeremy J. (Royal Society of Chemistry, 1999)
    The adsorption kinetics of hen egg white lysozyme (HEWL) in the presence of NaSCN at pH 7.4 onto Si0.8Ti0.2O2 surfaces were measured by means of time-resolved optical waveguide lightmode spectroscopy (OWLS). The adsorption ...
  • Chang, Harrison Hoon Seok; Huang, Zhaorong (Institute of Physics, 2010-06-30)
    A pyroelectric coefficient enhanced 2-2 connectivity laminate composites' energy harvesting credentials have been assessed. The use of the electrothermal coupling factor for laminate composites (k(Lam)(2)) for such an ...
  • Hart, Kaley; Allen, K.; Lindner, Marcus; Keenleyside, C.; Burgess, Paul J.; Eggers, J.; Buckwell, A. (2013-07-04)
    Report Prepared for DG Environment, Contract No ENV.B.1/ETU/2011/0029, Institute for European Environmental Policy, London. Land is a multifunctional resource and the amount available to be used for different purposes is ...
  • Clutterbuck, Ben (Cranfield University, 2009-10)
    Peatlands contain a significant proportion of the worlds’ total soil carbon, and are commonly assumed to serve as carbon sinks. There is however increasing evidence of carbon loss from peat soils, and DOC concentrations ...
  • Fanara, C. (Cranfield UniversitySchool of Industrial and Manufacturing Science, 2003-04)
    The 'high-pressure' atmospheric (TIG) arc plasma is studied by means of a multi-Langmuir probe system. In order to determine the appropriate regime of operation, definitions of the plasma parameters for the description of ...
  • Ofem, Usani Unoh (Cranfield University, 2013-11)
    Hyperbaric Gas Metal Arc Welding (GMAW) is an important technology for repair welding of deep sea pipelines and linking of existing pipeline networks to newer ones through tie-ins and hot-tap welding. With increasing water ...
  • Bansal, A.; Hergert, R.; Dou, G.; Wright, Robert V.; Bhattacharyya, Debabrata; Kirby, Paul B.; Yeatman, E. M.; Holmes A. S. (Elsevier Science B.V., Amsterdam., 2011-02-01)
    A new laser transfer process is reported which allows damage-free transfer of ferroelectric thin films from a growth substrate directly to a target substrate. The thin film ferroelectric material is deposited on a fused ...
  • Yang, Yafang (Cranfield University, 2012-12)
    Lean Manufacturing (LM) has been used in production processes to help manufacturing companies maintain competitive advantages for decades. However, with the increasingly fierce competition and pressure to sustain survival ...
  • Maksimovic, Maksim (Cranfield University, 2013-07)
    This research thesis presents the development of a novel Lean Knowledge Life Cycle (LeanKLC) framework to support the transformation into a Lean Product Development (LeanPD) knowledge environment. The LeanKLC framework ...
  • Achanga, Pius Coxwell; Shehab, Essam; Roy, Rajkumar; Nelder, Geoff (2005-12-31)
    Small-to-medium-sized manufacturing enterprises (SMEs) make significant contributions to most national economies. In the UK for instance, SMEs account for up to 40% of gross domestic product (GDP) and 85% of newly created ...
  • Al-Ashaab, Ahmed; Petritsch, Christoph; Gourdin, Mathilde; Aliende, Usue Aliende; Andino, Alberto; Varro, Brigitta; Rigatti, Carlotta; Golob, Matic; Summers, Mark; El-Nounu, Abdulrahman; Kayani, Amir (2013-09-19)
    The need of applying lean thinking to product development is becoming a must for the organisations to success in the current industry. This paper presents a tool that helps to define the actual status of the organisations ...

Search CERES


Browse

My Account