Browsing by Title

Browsing by Title

Sort by: Order: Results:

  • Multi-fidelity assessment of exhaust systems for complete engine-airframe integrations 
    Hueso Rebassa, Josep; Tejero, Fernando; Otter, John J.; Goulos, Ioannis; MacManus, David G. (Unknown, 2020-02-28)
    For podded underwing configurations, the goal of specific fuel consumption reduction has led to engine designs with larger fan diameters and higher bypass ratios to increase propulsive efficiency. As a consequence of this ...
  • Multi-fidelity combustor design and experimental test for a micro gas turbine system 
    Liu, Yize; Nikolaidis, Theoklis; Hossein Madani, Seyed; Sarkandi, Mohammad; Gamil, Abdelaziz; Firdaus Sainal, Muhamad; Vahid Hosseini, Seyed (MDPI, 2022-03-23)
    A multi-fidelity micro combustor design approach is developed for a small-scale combined heat and power CHP system. The approach is characterised by the coupling of the developed preliminary design model using the combined ...
  • Multi-fidelity modelling of low-energy trajectories for space mission design. 
    Neves, Rita (2019-03)
    The proposal of increasingly complex and innovative space endeavours poses growing demands for mission designers. In order to meet the established requirements and constraints while maintaining a low fuel cost, the use ...
  • A multi-fidelity optimization process for complex multiple gravity assist trajectory design 
    Bellome, Andrea; Sanchez Cuartielles, Joan Pau; Kemble, Stephen; Felicetti, Leonard (ICATT, 2021-06-25)
    Multiple-gravity assist (MGA) trajectories exploit successive close passages with Solar System planets to change spacecraft orbital energy. This allows to explore orbital regions that are demanding to reach otherwise. ...
  • Multi-Function RF Seeker Based on 3D Phased Array 
    Kocjancic, Leon (Cranfield University, 2017-01-11)
    3MT presentation at the 2016 Defence and Security Doctoral Symposium.Current RF seekers in use today have mechanical steerable antennas. In order to reduce the cost of the mechanical system and to significantly improve the ...
  • Multi-impact response of CR4 mild steel: Characterising the transition from absorption to failure 
    Thawani, Bonny; Batchelor, T.; Painter, Jonathan; Hazael, Rachael; Critchley, Richard (IOP Publishing, 2023-03-15)
    Single impact perforation shots are well understood for various target materials and different shaped projectiles. Although considered a rare case, localised multi-impacts are not well understood as they involve both ...
  • Multi-label classification algorithms for composite materials under infrared thermography testing 
    Alhammad, Muflih; Avdelidis, Nicolas Peter; Ibarra Castanedo, Clemente; Maldague, Xavier; Zolotas, Argyrios; Torbali, M. Ebubekir; Genestc, Marc (Taylor and Francis, 2022-10-14)
    The key idea in this paper is to propose multi-labels classification algorithms to handle benchmark thermal datasets that are practically associated with different data characteristics and have only one health condition ...
  • Multi-layer contribution propagation analysis for fault diagnosis 
    Tan, Ruomu; Cao, Yi (Springer, 2018-09-27)
    The recent development of feature extraction algorithms with multiple layers in machine learning and pattern recognition has inspired many applications in multivariate statistical process monitoring. In this work, two ...
  • A multi-layer model for e-government information security assessment 
    Al-Azazi , Sabri (Cranfield University, 2008-02)
    The emphasis on the value of time from the knowledge workers and citizens has driven governments towards the transformation to the electronic method in offering government services to the public. This underpinned the ...
  • Multi-layer ultrasonic imaging of as-built wire + arc additive manufactured components 
    Zimermann, Rastislav; Mohseni, Ehsan; Lines, David; Vithanage, Randika K. W.; MacLeod, Charles N.; Pierce, Stephen G.; Gachagan, Anthony; Javadi, Yashar; Williams, Stewart; Ding, Jialuo (Elsevier, 2021-10-13)
    Non-Destructive Evaluation (NDE) of metal Additively Manufactured (AM) components is crucial for the identification of any potential defects. Ultrasonic testing is recognised for its volumetric imaging capability in metallic ...
  • Multi-Layered clustering for power consumption profiling in smart grids 
    Al-Jarrah, O Y; Al-Hammadi, Y; Yoo, P D; Muhaidat, S (IEEE, 2017-06-13)
    Smart Grids (SGs) have many advantages over traditional power grids as they enhance the way electricity is generated, distributed, and consumed by adopting advanced sensing, communication and control functionalities that ...
  • Multi-layered Ruthenium-modified Bond Coats for Thermal Barrier Coatings 
    Tryon, B.; Feng, Q.; Wellman, R. G.; Murphy, K. S.; Yang, J.; Levi, C.G.; Nicholls, John R.; Pollock, T. M. (Springer Verlag, 2006-11)
    Diffusional approaches for fabrication of multi-layered Ru-modified bond coats for thermal barrier coatings have been developed via low activity chemical vapor deposition and high activity pack aluminization. Both processes ...
  • A multi-level analysis of the implementation of industrial internet of things: challenges and future prospects 
    Rajab, Sulaiman; Saxena, Prateek; Salonitis, Konstantinos (SSRN, 2020-10-26)
    Industrial Internet of Things (IIoT) is still a new research area. The main emphasis of the IIoT literature is on identifying the challenges involved in implementation of the IIoT. This paper summarizes the literature on ...
  • Multi-level and multi-objective design optimisation of a MEMS bandpass filter 
    Farnsworth, Michael; Tiwari, Ashutosh; Meiling, Zhu (Elsevier, 2016-10-11)
    Microelectromechanical system (MEMS) design is often complex, containing multiple disciplines but also conflicting objectives. Designers are often faced with the problem of balancing what objectives to focus upon and how ...
  • Multi-level and multidisciplinary optimisation of microelectromechanical systems 
    Farnsworth, Michael (Cranfield University, 2012-10)
    A comparative investigation into the role multi-level and multidisciplinary design optimisation can play in the automated design synthesis of microelectromechanical systems (MEMS) is presented. Microelectromechanical ...
  • A multi-level framework for adaptation to drought within temperate agriculture 
    Holman, Ian P.; Hess, Tim; Rey Vicario, Dolores; Knox, Jerry W. (Frontiers, 2021-01-20)
    Droughts affect a range of economically important sectors but their impacts are usually most evident within agriculture. Agricultural impacts are not confined to arid and semi-arid regions, but are increasingly experienced ...
  • Multi-material topology optimization for composite metal aircraft structures 
    Liu, Cheng; Yasaee, Mehdi; Dayyani, Iman (2017-08-31)
    This paper investigates an optimization routine for lightweight composite-metal hybrid aircraft structures. This routine is developed based on two existing topology optimization approaches, Moving Morphable Components ...
  • Multi-modal assessment of light transport through biological tissue 
    Kallepalli, Akhil (2020-02)
    The advent of biomedical optics and understanding of light transport through tissues has gathered enormous popularity since the works of Britton Chance, Steven Jacques and Valery Tuchin. Understanding light transport has ...
  • A multi-modal exploration of heterogeneous physico–chemical properties of DCIS breast microcalcifications 
    Gosling, Sarah; Calabrese, Doriana; Nallala, Jayakrupakar; Greenwood, Charlene; Pinder, Sarah; King, Lorraine; Marks, Jeffrey; Pinto, Donna; Lynch, Thomas; Lyburn, Iain Douglas; Hwang, Shelley; Grand Challenge PRECISION Consortium; Rogers, Keith; Stone, Nicholas (Royal Society of Chemistry, 2022-03-21)
    Ductal carcinoma in situ (DCIS) is frequently associated with breast calcification. This study combines multiple analytical techniques to investigate the heterogeneity of these calcifications at the micrometre scale. X-ray ...
  • Multi-mode electric actuator dynamic modelling for missile fin control 
    Gurav, Bhimashankar; Economou, John T.; Saddington, A. J.; Knowles, Kevin (MDPI, 2017-06-14)
    Linear first/second order fin direct current (DC) actuator model approximations for missile applications are currently limited to angular position and angular velocity state variables. Furthermore, existing literature with ...