Estimating field-scale soil moisture using SAR remote sensing and the COSMOS-UK network

dc.contributor.advisorWaine, Toby W.
dc.contributor.advisorCorstanje, Ronald
dc.contributor.authorBeale, John E. P.
dc.date.accessioned2024-03-13T15:13:10Z
dc.date.available2024-03-13T15:13:10Z
dc.date.issued2021-03
dc.description.abstractSoil moisture (SM) is one of the key parameters in the engineering, agronomic, geological, ecological, biological and hydrological functions of soil. Its needed to support decision making in agriculture for irrigation and trafficability, and is a key input to hydrological and meteorological models. Remote sensing has significant potential but there remains a challenge to improve the accuracy and usefulness of the data for end users. The objective of this thesis is to develop a field-scale soil moisture estimate from Sentinel-1 C-band synthetic aperture radar (SAR) data, that is sufficiently accurate to be useful to farmers and agronomists and the research community. SAR is attractive as an all-weather remote sensing solution with potential to estimate soil moisture over large scales and at high spatial resolution. But because SAR backscatter is strongly a ected by overlying vegetation and crops, and to some extent by soil surface roughness and soil texture, the process of SM retrieval from SAR is very complex. Among a number of potential solutions, one approach is to quantify the non-SM contributions by processing additional data alongside SAR data using models that are trained against in-situ SM observations. This is very resource intensive, with the results being limited in scope and accuracy by the ancillary and training data. The alternative change detection (CD) algorithm avoids the use of additional data or training sites by assuming, instead, that the e ects of soil surface roughness and vegetation are relatively static on the timescale of soil moisture variation. This can be highly e ective for estimating relative SM in many areas but not, crucially, in areas of farmland under arable cultivation where rapid changes in vegetation and soil surface roughness are common. This is mitigated in current published SM products by restricting their spatial resolution to around 1 km, averaging out the e ects of anthropogenic change over a diversity of land uses. A 1 km pixel area is an order of magnitude larger than the average field size in the UK, for example. Such products do not satisfy the needs of farmers in arable areas and do not exploit the high spatial resolution available from SAR sensors such as Sentinel-1 C-band (20 m). A key objective of this thesis is to achieve a better understanding of the capabilities of the change detection algorithm and enhance it to provide more accurate results for farming areas at field scale. Whilst achieving field-scale resolution and better accuracy from the CD approach would be significant, the results would still not very useful to farmers. The CD algorithm is not trained against ground measurements, so its output is a Soil Moisture Index (SMI) which is a relative estimate of SM within the boundaries of previous SAR measurements at each pixel. To obtain absolute values such as volumetric water content or soil moisture deficit (e.g. for irrigation management), the SMI is calibrated against the expected range of SM, often taken to be the di erence between the soil’s field capacity (FC) and permanent wilting point (PWP) predicted by the soil texture at each location. This study shows that a 10 to 20 vol.% mean absolute error may be introduced by uncertainties in selecting appropriate soil texture so the importance of using a reliable soil map is underlined. It is further shown that that the highly dynamic nature of SM in the shallow surface layer penetrated by C-band SAR (1 to 2 cm) means that the Van Genuchten model parameters,θS and θR should be used as wet and dry references to define the expected range of SM. The common practice of using FC and PWP is shown to contribute an additional 2 to 10 vol.% error. Taken together, these errors are large compared to user requirements of 4 to 5 vol.% and a typical seasonal range of 20 to 40 vol.% depending on soil texture. Validation is important for users to have confidence in the remote sensing of soil moisture from SAR. A further objective of this study was to address the issue of depth mismatch between the penetration of the SAR and the ground observations used for validation. The study concludes that C-band SAR SM estimates should not be validated directly against ground sensors at 5 to 10 cm depth. A novel validation method is proposed for validation of SAR SM estimates against simulated soil moisture profiles at 2 cm depth using a soil hydraulic model fitted to ground observations. In this thesis, the latter were obtained from the COSMOS-UK network of soil monitoring stations using Cosmic Ray Neutron Sensors with an approximately 200 m radius measurement zone and average measurement depth calculated to be around 10 cm. As a case study of using this improved method, the performance of the published Copernicus SSM soil moisture product across 13 COSMOS-UK test sites is shown to be in the range 8 to 20 vol.% mean error. It confirms, as expected, that the worst performance is in areas of arable agriculture, justifying the focus of the thesis in such areas. As a stage to achieve the key objective, an SM estimate, spatially aggregated to field boundaries, is demonstrated by the first known implementation of the CD algorithm in Google Earth Engine. It was found that the increased speckle noise at this scale is typically balanced by reductions in noise from excluded clutter sources and increased sensitivity to SM. Periodic noise due to satellite orbit geometries (ascending versus descending) remains evident but temporal smoothing was shown to be e ective against it. The performance, in terms of mean error, at field-scale varies from 8 vol.% in grass pasture to 20 vol.% in some arable fields during periods of rapid crop growth. To improve the accuracy in arable fields, a process has been developed to use multispectral remote sensing data to assign levels of confidence in the performance of the CD algorithm, to each field on every measurement date. An alternative method is proposed to achieve a more reliable soil moisture estimate by using two-dimensional interpolation using inverse distance and confidence weighting (IDCW) across a range of neighbouring fields within a local zone. By this method it is shown that, during the peak growing season, the mean absolute error in the soil moisture estimate for wheat fields is reduced from 20 vol.% to less than 5 vol.%, retaining field-scale resolution. This is the first time such levels of accuracy have been reported at field scale from Sentinel- 1 SAR without the training of a model. The method is applicable anywhere where the remote sensing data is available alongside a suitable soil texture map. The output meets the operational requirements of farmers for 5 vol.% SM accuracy and is very close to research requirements of 4 vol.%. It may be used to create a mapping product for use by farmers and agronomists using to inform decision making in near real-time. For scientists, engineers, infrastructure engineers and environmentalists the data will be valuable for research into flooding, soil erosion, ground movement and landslip.en_UK
dc.description.coursenamePhD in Environment and Agrifooden_UK
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/20979
dc.language.isoenen_UK
dc.publisherCranfield Universityen_UK
dc.publisher.departmentSWEEen_UK
dc.rights© Cranfield University, 2021. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder.en_UK
dc.subjectSoil moistureen_UK
dc.subjectsynthetic aperture radaren_UK
dc.subjectSentinel-1en_UK
dc.subjectfield-scaleen_UK
dc.subjectCOSMOS-UKen_UK
dc.subjectmultispectral remote sensing dataen_UK
dc.titleEstimating field-scale soil moisture using SAR remote sensing and the COSMOS-UK networken_UK
dc.typeThesis or dissertationen_UK
dc.type.qualificationlevelDoctoralen_UK
dc.type.qualificationnamePhDen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
BEALE_J_2021.pdf
Size:
98.04 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description: