Modal response of hybrid raster orientation on material extrusion printed acrylonitrile butadiene styrene and polyethylene terephthalate glycol under thermo-mechanical loads
Date
2023-02-05
Advisors
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Department
Type
Article
ISSN
0142-9418
item.page.extent-format
Citation
Almutairi MD, Mascarenhas TA, Alnahdi SS, He F & Khan MA (2023) Modal response of hybrid raster orientation on material extrusion printed acrylonitrile butadiene styrene and polyethylene terephthalate glycol under thermo-mechanical loads, Polymer Testing, Volume 120, March 2023, Article number 107953
Abstract
In this paper we look at Acrylonitrile Butadiene Styrene (ABS) and Polyethylene Terephthalate Glycol (PETG), chosen for their low cost, high strength and temperature resistance. This study evaluates the bending fatigue performance of Material extrusion (MEX) ABS and PETG cantilever beams and compares their properties while varying a printing parameter under thermal loads. The study, using custom building orientation angles of 90o, 45o and 60o between the layers, tested the beams at different temperatures from 30o to 50 °C. The results show the effects of the building orientations and the effects of temperature on the sample. The printing orientation, which is the same as loading, also slows the crack growth.
Description
item.page.description-software
item.page.type-software-language
item.page.identifier-giturl
Keywords
Hybrid raster orientation, ABS, PETG, Fatigue bending test, Variable ambient temperature
Rights
Attribution 4.0 International