Comparison of PERPRO tools grade N5 and N10 against grade N5D and N10D
Date published
1964-02
Free to read from
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
College of Aeronautics
Department
Type
Report
ISSN
Format
Citation
Abstract
Tools of grade N5, N5D, N10 and N1OD were tested to 0.030 in. flankwear when machining EN 9 at a cutting speed of 500 f.p.m. with 0.010 in/rev. feed and 0.10 in. depth of cut. The results showed that there was no significant difference in tool life between the normal grades and the 'D’ grades.