Fluid mixing in rotor/stator mixers
| dc.contributor.advisor | Brown, D. E. | |
| dc.contributor.author | Sparks, T. | |
| dc.date.accessioned | 2009-03-25T16:56:01Z | |
| dc.date.available | 2009-03-25T16:56:01Z | |
| dc.date.issued | 1996-12 | |
| dc.description.abstract | An industrial rotor-stator mixer was fitted into a flow loop to carry out overall power balance, flow visualisation and residence time distribution experiments. These were performed on various rotor-stator geometries and a half-scale unit. The overall power measurements showed that a large amount of power was given to the fluid by the rotor and estimates of the local turbulent energy dissipation rate per unit mass, e, were made using these data. It was found that the pumping efficiency of rotor- stator mixers is - 10 to 20% and an expression for the motor power (when the flow rate is controlled) was found. The flow pattern was characterised by a high tangential velocity in the rotor followed by an abrupt transformation to radial flow through the stator. It was suggested that the kinetic energy of the fluid in the rotor is transformed to pumping, ftiction and turbulence in the stator and that this is the region of greatest importance for mixing. The residence time distribution is characterised by a region of plug flow in series with a region of mixed flow. The flow through the volute has a dominant effect on the overall residence time distribution and the RTD is insensitive to operating condition (flow rate, rotor speed) or geometry. The knowledge gained from the above experiments was used to design diazo-coupling experiments (a mixing-sensitive competitive chemical reaction with well known kinetics) such that they gave qualitative information (e. g. best feed position) and quantitative information (e. g. turbulent energy dissipation rate) on the performance of a rotor-stator mixer. e was found to be proportional to the power given the fluid by the rotor and estimates for e of order 500 W kg-' were made using a micro-mixing model. | en_UK |
| dc.identifier.uri | http://hdl.handle.net/1826/3307 | |
| dc.language.iso | en | en_UK |
| dc.publisher | Cranfield University | en_UK |
| dc.title | Fluid mixing in rotor/stator mixers | en_UK |
| dc.type | Thesis or dissertation | en_UK |
| dc.type.qualificationlevel | Doctoral | en_UK |
| dc.type.qualificationname | PhD | en_UK |