Size effects on residual stress and fatigue crack growth in friction stir welded 2195-T8 aluminium - Part II: Modelling
| dc.contributor.author | Ma, Yu E. | - |
| dc.contributor.author | Staron, P. | - |
| dc.contributor.author | Fischer, T. | - |
| dc.contributor.author | Irving, Phil E. | - |
| dc.date.accessioned | 2012-11-06T23:01:06Z | |
| dc.date.available | 2012-11-06T23:01:06Z | |
| dc.date.issued | 2011-12-31T00:00:00Z | - |
| dc.description.abstract | The use of residual K (Kres) approaches for prediction of fatigue crack growth rates in residual stress fields was studied. Finite element models of the samples were built and the measured residual stress data put into the model. The virtual crack closure technique (VCCT) was used to calculate (stress intensity factor from residual stress) together with its changes with crack length using data from the part I paper. Local Kres values were used to calculate effective R values. Kop and ΔKeff values throughout the crack path in the weld were calculated. The master curve approach was used to relate these to corresponding values for crack growth rates. Predicted crack growth rates were compared with experimental results. Changes in crack growth rate found as the crack grows through the weld can successfully be predicted via application of this closure based model. Agreement between predictions and experimental data was best for tensile residual stress fields and was not as exact in compression. Possible reasons for this discrepancy are discussed. | en_UK |
| dc.identifier.citation | Yu E. Ma, P. Staron, T. Fischer, P.E. Irving, Size effects on residual stress and fatigue crack growth in friction stir welded 2195-T8 aluminium - Part II: Modelling, International Journal of Fatigue, Volume 33, Issue 11, November 2011, Pages 1426–1434. | |
| dc.identifier.issn | 0142-1123 | - |
| dc.identifier.uri | http://dx.doi.org/10.1016/j.ijfatigue.2011.05.008 | - |
| dc.identifier.uri | http://dspace.lib.cranfield.ac.uk/handle/1826/7642 | |
| dc.publisher | Elsevier Science B.V., Amsterdam. | en_UK |
| dc.rights | NOTICE: this is the author’s version of a work that was accepted for publication in International Journal of Fatigue Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in International Journal of Fatigue, VOL 33, ISSUE 11, (2011) DOI:10.1016/j.ijfatigue.2011.05.008 | |
| dc.subject | Fatigue, Residual stress, Friction stir welding | en_UK |
| dc.title | Size effects on residual stress and fatigue crack growth in friction stir welded 2195-T8 aluminium - Part II: Modelling | en_UK |
| dc.type | Article | - |