Shape optimization of a curved duct with Free Form Deformations
| dc.contributor.author | Chiereghin, Nicola | |
| dc.contributor.author | Guglielmi, Luigi | |
| dc.contributor.author | Savill, Mark | |
| dc.contributor.author | Manca, Enrico | |
| dc.contributor.author | Rigobello, Aurora | |
| dc.contributor.author | Barison, Marco | |
| dc.contributor.author | Benini, Ernesto | |
| dc.date.accessioned | 2017-06-22T10:36:03Z | |
| dc.date.available | 2017-06-22T10:36:03Z | |
| dc.date.issued | 2017-06-09 | |
| dc.description.abstract | The Free Form Deformation method was applied to a S-duct geometry to reduce total pressure losses and flow distortion. The deformation method was coupled with a multiobjective genetic algorithm to optimize the shape of a diffusing S-duct, which was previously investigated, both numerically and experimentally. During the optimization process, 200 deformed shapes were tested with steady-state CFD simulations and the performances were evaluated both in terms of total pressure losses and swirl angle at the outlet. It was obtained a Pareto front with a maximum total pressure losses reduction of 20% and a maximum swirl reduction of 10%. The two extreme points of the Pareto front were further investigated by transient Detached Eddy Simulations to assess also the impact of the optimization on the flow instability. Surprisingly, one of the solutions showed stable and stationary vortical structures. This is in strong contrast with the previous investigations of the flow field time history of the baseline configuration, which outlined strong oscillations of the flow field combined with a high increase of the distortion parameters in comparison with the time-averaged flow field. | en_UK |
| dc.identifier.citation | Nicola Chiereghin, Luigi Guglielmi, A Mark Savill, Enrico Manca, Aurora Rigobello, Marco Barison, and Ernesto Benini, Shape optimization of a curved duct with Free Form Deformations, 23rd AIAA Computational Fluid Dynamics Conference: AIAA AVIATION Forum 2017, 5 - 9 June 2017, Denver, Colorado, USA, AIAA 2017- 4114, pp. 1-27 | en_UK |
| dc.identifier.uri | http://dx.doi.org/10.2514/6.2017-4114 | |
| dc.identifier.uri | https://dspace.lib.cranfield.ac.uk/handle/1826/12094 | |
| dc.language.iso | en | en_UK |
| dc.publisher | AIAA | en_UK |
| dc.rights | ©2017 AIAA. This is the Author Accepted Manuscript. Please refer to any applicable publisher terms of use. | |
| dc.title | Shape optimization of a curved duct with Free Form Deformations | en_UK |
| dc.type | Conference paper | en_UK |