Plastic pre-compression and creep damage effects on the fracture toughness behaviour of Type 316H stainless steel
Date published
2014-10-14
Free to read from
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Department
Type
Article
ISSN
0013-7944
Format
Citation
Ali Mehmanparast, Catrin M. Davies, David W. Dean, Kamran M. Nikbin, Plastic pre-compression and creep damage effects on the fracture toughness behaviour of Type 316H stainless steel, Engineering Fracture Mechanics, Volume 131, November 2014, Pages 26-37
Abstract
The influence of inelastic damage in the form of plastic pre-strain and creep damage, on fracture toughness of Type 316H stainless steel has been examined. Creep damage has been introduced into the 8% pre-compressed material by interrupting creep crack growth tests. Comparisons have been made between the fracture toughness test results from the as-received, pre-compressed and creep damaged materials. Furthermore, the effects of creep crack discontinuities on the crack tip strain fields have been examined by digital image correlation measurements. Inelastic damage was found to reduce the fracture toughness of the material, with creep damage having more severe effects than pre-strain.
Description
Software Description
Software Language
Github
Keywords
Creep damage, Fracture toughness, Pre-straining, 316H stainless steel, Micro cracks, Crack discontinuity, DIC measurements
DOI
Rights
Attribution-Non-Commercial-No Derivatives 3.0 Unported (CC BY-NC-ND 3.0).
You are free to:
Share — copy and redistribute the material in any medium or format.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Information:
Non-Commercial — You may not use the material for commercial purposes.
No Derivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
NOTICE: this is the author’s version of a work that was accepted for publication in Engineering Fracture Mechanics. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Engineering Fracture Mechanics, Vol. 131, 14th October 2014 DOI: 10.1016/j.engfracmech.2014.10.005
NOTICE: this is the author’s version of a work that was accepted for publication in Engineering Fracture Mechanics. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Engineering Fracture Mechanics, Vol. 131, 14th October 2014 DOI: 10.1016/j.engfracmech.2014.10.005