Combustion behaviour of single pellets of coal–wood mixtures in a hot gas flow field
Date published
Free to read from
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
Department
Type
ISSN
Format
Citation
Abstract
This experimental study explores the burning characteristics of single pellets made of wood and coal mixtures for co-firing. Three types of pellets were prepared with different wood–coal ratios (100:0, 80:20, and 50:50). Experiments were carried out in a laboratory reactor at rapid heating rates and under oxygen concentrations between 10 and 40%. To investigate their combustion behavior, single pellets were suspended on a wire injected into a hot gas stream at 1340 K and flame and char combustion were recorded through an observation window by means of a high-resolution (4K) camera. The sequential combustion time, volatile flame characteristics, and mass reduction rate were obtained over a time profile by carefully controlled particle injection. The results demonstrated that the char combustion time increased significantly in comparison to the volatile combustion time, which only varied a little, when the pellets contained coal in the mixture. Partially detached flames were also predominantly observed on pure biomass pellets at oxygen concentrations between 21 and 40%. During the homogeneous combustion period, the cross-sectional area of a pellet shrunk by 26.3–37.5% depending upon the type of pellet.