Improving mechanical properties of wire + arc additively manufactured maraging steel through plastic deformation enhanced aging response
dc.contributor.author | Xu, Xiangfang | |
dc.contributor.author | Ganguly, Supriyo | |
dc.contributor.author | Ding, Jialuo | |
dc.contributor.author | Philip, Dirisu | |
dc.contributor.author | Martina, Filomeno | |
dc.contributor.author | Liu, Xianwei | |
dc.contributor.author | Williams, Stewart W. | |
dc.date.accessioned | 2019-01-15T16:51:51Z | |
dc.date.available | 2019-01-15T16:51:51Z | |
dc.date.issued | 2018-12-28 | |
dc.description.abstract | Maraging steel gains ultrahigh strength through aging; however, wire + arc additively manufactured maraging steel features a columnar-dendritic structure with associated segregation and shows a much less pronounced aging response. In this paper, plastic deformation was introduced through interpass cold rolling during the layer-by-layer deposition process. After aging, mechanical testing showed a substantial strength improvement from 1410MPa (unrolled) to 1750MPa (50kN rolled). Rolling induced partial recrystallisation to break the dendritic structure and form high-angle grain boundaries, which promoted the atoms diffusion to enable a more uniform solutionizing process and improved the subsequent aging response by 105-110%. The main contribution of overall strengthening of the rolled alloy was attributed to the effective aging process, accounting for more than 95% of the entire strength increase. | en_UK |
dc.identifier.citation | Xu X, Ganguly S, Ding J, et al., Improving mechanical properties of wire + arc additively manufactured maraging steel through plastic deformation enhanced aging response. Materials Science and Engineering A: Structural Materials, Volume 747, February 2019, pp. 111-118 | en_UK |
dc.identifier.issn | 0921-5093 | |
dc.identifier.uri | https://doi.org/10.1016/j.msea.2018.12.114 | |
dc.identifier.uri | https://dspace.lib.cranfield.ac.uk/handle/1826/13824 | |
dc.language.iso | en | en_UK |
dc.publisher | Elsevier | en_UK |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | wire + arc additive manufacture | en_UK |
dc.subject | plastic deformation | en_UK |
dc.subject | maraging steel | en_UK |
dc.subject | dislocation density | en_UK |
dc.subject | age hardening | en_UK |
dc.title | Improving mechanical properties of wire + arc additively manufactured maraging steel through plastic deformation enhanced aging response | en_UK |
dc.type | Article | en_UK |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Improving_mechanical_properties-wire_plus_arc-2018.pdf
- Size:
- 1.09 MB
- Format:
- Adobe Portable Document Format
- Description:
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.63 KB
- Format:
- Item-specific license agreed upon to submission
- Description: