Simulation of wire and arc additive manufacturing of 308L stainless steel with coldArc gas metal arc welding

Simple item page
dc.contributor.authorHussein, Nur Izan Syahriah
dc.contributor.authorJmmani, Nur Aisyah Nabilah Mohd
dc.contributor.authorAyof‬, Mohamad Nizam
dc.contributor.authorAbd Rahim, Toibah
dc.contributor.authorZainal Abidin, Muhammad Zaimi
dc.contributor.authorYusof, Farazila
dc.contributor.authorJamaludin, Mohd Fadzil
dc.contributor.authorWilliams, Stewart
dc.date.accessioned2021-10-20T10:20:22Z
dc.date.available2021-10-20T10:20:22Z
dc.date.issued2021-10-13
dc.description.abstractThis research focuses on the capabilities of coldArc GMAW in the behavior of heat input to the weld bead dimension. In this study, the effect of process GMAW of 308L stainless steel filler wire with a thickness of 1.2 mm and 304L stainless steel base plate, with a dimension of 120 mm x 25 mm x 10 mm (height x width x thickness) by applying WAAM. The data was collected using MATLAB of a Smart Weld Rosenthal’s Steady-State 3D Isotherms. A Taguchi response was used in the DOE method with Minitab software to analyze the effect of process parameters on height, width, and depth of weld bead dimension during GMAW. The experiments were conducted following the low, mid, and high input parameters will show the different structures of weld bead dimension, which include 70 A, 75 A, and 78 A (arc current), 15 V, 16 V, and 17 V (voltage), 400 mm/min, 600 mm/min, and 800 mm/min (welding speed). Hence, the optimum value is 75 A, 16 V, and 800 mm/min, and the most significant parameters to deposit stainless steel with coldArc GMAW were welding speed followed by arc current and voltage.en_UK
dc.identifier.citationHussein NIS, Jmmani NAN, Ayof MN, et al., (2021) Simulation of wire and arc additive manufacturing of 308L stainless steel with coldArc gas metal arc welding. Journal of Applied Engineering Design & Simulation, Volume 1, Issue 1, September 2021, pp. 88-96en_UK
dc.identifier.issn2805-5756
dc.identifier.urihttps://doi.org/10.24191/jaeds.v1i1.35
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/17188
dc.language.isoenen_UK
dc.publisherManaged by SMRI UiTMen_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectWire and Arc Additive Manufacturingen_UK
dc.subjectGas Metal Arc weldingen_UK
dc.subjectcoldArcen_UK
dc.subjectStainless Steel 308Len_UK
dc.subjectStainless Steel 304Len_UK
dc.subjectDesign of Experimenten_UK
dc.subjectTaguchi Methoden_UK
dc.titleSimulation of wire and arc additive manufacturing of 308L stainless steel with coldArc gas metal arc weldingen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
additive_manufacturing_of_308L_stainless_steel-2021.pdf
Size:
453.39 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)