On the composition gradient of steel/Invar functionally graded material manufactured by wire-based direct energy deposition

Simple item page
dc.contributor.authorWang, Jun
dc.contributor.authorBiswal, Romali
dc.contributor.authorChen, Guangyu
dc.contributor.authorPardal, Goncalo Rodrigues
dc.contributor.authorLu, Yao
dc.contributor.authorDing, Jialuo
dc.contributor.authorWilliams, Stewart
dc.date.accessioned2025-01-09T14:45:16Z
dc.date.available2025-01-09T14:45:16Z
dc.date.freetoread2025-01-09
dc.date.issued2024-09-25
dc.date.pubOnline2024-12-09
dc.description.abstractThis study utilized double-wire plasma arc direct energy deposition to produce functionally graded materials (FGMs) with two transition designs, abrupt (AT) and gradual (GT), from Er90s steel to Invar. The study systematically compared the transition in chemical composition, microstructure, phase evolution, thermal stress, and mechanical performance. Both FGM types exhibited a band structure in the Er90s section and coarse columnar grains in the Invar section, with the AT deposit showing a 1 mm thick, defect-free interface and the GT deposit having an 18 mm thick transition region with distinct boundaries. It revealed diverse microstructures across the transition zones, including fine ferrite, martensite with minor retained austenite (RA), coarse columnar austenite with martensite dendrites, and single FCC austenite. The GT sample uniquely featured a microstructure of martensite laths inside prior austenite decorated by RA semicontinuous network, with a crack detected due to dilatational stresses from martensite transformation. Hardness was similar in both FGM types, with higher values at the interfaces, especially in the GT FGM. The GT FGM demonstrated higher strength but lower ductility compared to the AT FGM, with failure occurring in the Invar portion for both. Thermal stress modelling indicated smoother stress transitions in the GT sample but no significant performance differences between Er90s and Invar. This study showcases the effectiveness of double-wire plasma arc DED in producing steel/Invar FGMs with varying composition gradients. It also underscores the importance of selecting the right mixing ratio for Er90s/Invar FGM deposits to avoid cracking and deterioration of properties in the gradient area.
dc.description.journalNameAdditive Manufacturing
dc.description.sponsorshipThis work is financially supported by the “Enabling Multi-Functional Performance through Multi-Material Additive Manufacturing” project (No 862617 – MULTI-FUN) funded by European Union’s Horizon 2020 research and innovation programme.
dc.identifier.citationWang J, Biswal R, Chen G, et al., (2024) On the composition gradient of steel/Invar functionally graded material manufactured by wire-based direct energy deposition. Additive Manufacturing, Volume 96, September 2024, Article number 104594
dc.identifier.eissn2214-8604
dc.identifier.elementsID561006
dc.identifier.issn2214-8604
dc.identifier.paperNo104594
dc.identifier.urihttps://doi.org/10.1016/j.addma.2024.104594
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/23342
dc.identifier.volumeNo96
dc.languageEnglish
dc.language.isoen
dc.publisherElsevier
dc.publisher.urihttps://www.sciencedirect.com/science/article/pii/S2214860424006407
dc.rightsAttribution 4.0 Internationalen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subject40 Engineering
dc.subject4016 Materials Engineering
dc.subject4014 Manufacturing engineering
dc.subject4016 Materials engineering
dc.subjectComposition gradient
dc.subjectFunctionally graded material
dc.subjectWire-based direct energy deposition
dc.subjectMicrostructure evolution
dc.subjectProperties
dc.titleOn the composition gradient of steel/Invar functionally graded material manufactured by wire-based direct energy deposition
dc.typeArticle
dc.type.subtypeJournal Article
dcterms.dateAccepted2024-12-06

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
On_the_composition-2024.pdf
Size:
25.93 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Plain Text
Description:
Download

Collections

Staff publications (SATM)