Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys

Simple item page
dc.contributor.authorQi, Zewu
dc.contributor.authorCong, Baoqiang
dc.contributor.authorQi, Bojin
dc.contributor.authorSun, Hongye
dc.contributor.authorZhao, Gang
dc.contributor.authorDing, Jialuo
dc.date.accessioned2020-01-23T17:33:39Z
dc.date.available2020-01-23T17:33:39Z
dc.date.issued2017-12-16
dc.description.abstractAs the properties of wire + arc additively manufactured Al-6.3Cu alloy cannot meet the applying requirements, a double-wire + arc additive manufacturing system was built to add magnesium into Al-Cu deposits for higher mechanical properties. Two commercial binary wires aluminum-copper ER2319 and aluminum-magnesium ER5087 were chosen as the filler metal to build Al-Cu-Mg components with different compositions by adjusting the wire feed speed. The microstructure and morphology of thin wall samples were characterized by optical micrographs (OM), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The Vickers hardness and tensile properties were investigated. The microstructure of Al-Cu-Mg deposits was mainly composed of coarse columnar grains and fine equiaxed grains with non-uniformly distributing characteristics. With higher Cu but lower Mg content, the strengthen phase turned to Al2Cu + Al2CuMg from Al2CuMg, and the micro hardness presented an increasing trend. The isotropic characteristics of ultimate tensile strength (UTS), yield strength (YS) and elongation were revealed in these samples. The UTS was about 280 ± 5 MPa both in horizontal and vertical directions for all samples. The YS showed an increasing trend from 156 MPa to 187 MPa with the same content trend, while elongation decreased from 8.2% to 6%. The fractographs exhibited typical brittle fracture characteristics.en_UK
dc.identifier.citationQi Z, Cong B, Qi B, et al., (2018) Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys. Journal of Materials Processing Technology, Volume 255, May 2018, pp. 347-353en_UK
dc.identifier.issn0924-0136
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2017.12.019
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/15012
dc.language.isoenen_UK
dc.publisherElsevieren_UK
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectMechanical propertiesen_UK
dc.subjectDouble-wire + arc additive manufacturingen_UK
dc.subjectAl-Cu-Mg alloyen_UK
dc.subjectMicrostructureen_UK
dc.titleMicrostructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloysen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Microstructure_and_mechanical_properties_of_double-wire + arc-2018.pdf
Size:
5.33 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)