Wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V

Simple item page
dc.contributor.authorWang, Chong
dc.contributor.authorSuder, Wojciech
dc.contributor.authorDing, Jialuo
dc.contributor.authorWilliams, Stewart
dc.date.accessioned2021-02-16T10:50:23Z
dc.date.available2021-02-16T10:50:23Z
dc.date.issued2021-02-04
dc.description.abstractIn this study, a novel wire based plasma transferred arc (PTA)-laser hybrid additive manufacture process was proposed for deposition of large-scale titanium parts with high deposition rate and near-net shape. The optimum processing conditions, including the heat source configuration, wire feeding position, and arc-to-laser separation distance, were investigated. The benefits of using the hybrid process over the single PTA and laser deposition processes on their own were studied. The results show that compared to the single PTA process, the hybrid process has extended energy distribution and melt pool size, giving more interaction time of the wire with the heat sources and therefore a higher deposition rate. Compared to the laser process, the hybrid process has a much higher wire melting efficiency and tolerance to wire positioning accuracy. Owing to more distributed energy across the two heat sources, the likelihood of keyhole formation in the hybrid process is lower than that in the single PTA process. The best configuration for the hybrid process is the PTA leading, combined with front feeding of the wire. In this configuration, the PTA is used to melt the feedstock and the laser is used to control the melt pool size, which allows independent control of deposition rate and bead shape. A set of multi-layer walls was built to demonstrate the feasibility of this process for the manufacture of engineering parts. The results show that the achieved flat beads are very desirable for low surface waviness and lead to near-net-shape deposition. The main limitation of the hybrid process is remelting into the underlying layer. To overcome this, a multi-energy source process with more evenly distributed energy has been proposed.en_UK
dc.identifier.citationWang C, Suder W, Ding J, Williams S. (2021) Wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V. Journal of Materials Processing Technology, Volume 294, July 2021 Article number 117080en_UK
dc.identifier.issn0924-0136
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2021.117080
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/16349
dc.language.isoenen_UK
dc.publisherElsevieren_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectPlasma arc-laser hybrid additive manufactureen_UK
dc.subjectWire + laser additive manufactureen_UK
dc.subjectHigh deposition rateen_UK
dc.subjectMulti-energy sourceen_UK
dc.titleWire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4Ven_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Wire_based_plasma_arc_and_laser_hybrid_additive_manufacture_of Ti-6Al-4V-2021.pdf
Size:
10.08 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)