Suitability of MEMS accelerometers for condition monitoring: An experimental study
| dc.contributor.author | Albarbar, A. | - |
| dc.contributor.author | Mekid, S. | - |
| dc.contributor.author | Starr, Andrew G. | - |
| dc.contributor.author | Pietruszkiewicz, R | - |
| dc.date.accessioned | 2013-01-16T23:01:57Z | |
| dc.date.available | 2013-01-16T23:01:57Z | |
| dc.date.issued | 2008-02-06T00:00:00Z | - |
| dc.description.abstract | With increasing demands for wireless sensing nodes for assets control and condition monitoring; needs for alternatives to expensive conventional accelerometers in vibration measurements have been arisen. Micro-Electro Mechanical Systems (MEMS) accelerometer is one of the available options. The performances of three of the MEMS accelerometers from different manufacturers are investigated in this paper and compared to a well calibrated commercial accelerometer used as a reference for MEMS sensors performance evaluation. Tests were performed on a real CNC machine in a typical industrial environmental workshop and the achieved results are presented. | en_UK |
| dc.identifier.citation | A. Albarbar, S. Mekid, A. Starr and R. Pietruszkiewicz. Sensors, 2007, volume 8, issue 2, pp784-799 | |
| dc.identifier.issn | 1424-8220 | - |
| dc.identifier.uri | http://dx.doi.org/10.3390/s8020784 | - |
| dc.identifier.uri | http://dspace.lib.cranfield.ac.uk/handle/1826/7742 | |
| dc.publisher | MDPI | en_UK |
| dc.subject | Condition Monitoring | en_UK |
| dc.subject | Micro-Electro Mechanical System | en_UK |
| dc.subject | MEMS Accelerometer | en_UK |
| dc.subject | Vibration Measurements | en_UK |
| dc.subject | Transfer Function | en_UK |
| dc.title | Suitability of MEMS accelerometers for condition monitoring: An experimental study | en_UK |
| dc.type | Article | - |