Analysis of infrared optical polishing effluents and reduction of COD and TSS levels by ultrafiltration and coagulation/flocculation

Files

Analysis_of_infrared_optical_polishing_effluents-2014.pdf (586.97 KB)

Date published

2014-01-27

Free to read from

Authors

Durazo-Cardenas, Isidro
Noguera-Sagrera, Albert
Impey, Susan A.

Supervisor/s

Journal Title

Journal ISSN

Volume Title

Publisher

Taylor & Francis

Department

Type

Article

ISSN

1944-3994

Format

URI

https://cris.cranfield.ac.uk/converis/mypages/editor/Publication/4233055/default
 https://dspace.lib.cranfield.ac.uk/handle/1826/10485

Citation

Durazo-Cardenas, I. S., Noguera-Sagrera, A. , Impey, S. A. (2014) Analysis of infrared optical polishing effluents and reduction of COD and TSS levels by ultrafiltration and coagulation/flocculation, Desalination and Water Treatment, Vol. 52, Iss. 25-27, pp. 4612-4621

Abstract

Samples of polishing effluent produced during infrared optics manufacture were analyzed. Their particle size, composition, Zeta potential, chemical oxygen demand (COD), total suspended solids (TSS), and settleable solids were determined. Feasibility of treatment methods such as ultrafiltration (UF) and coagulation/flocculation was investigated to reduce both COD and TSS. It was found that effluents consisted of a suspension of micro- and nanoparticles. Effluent particle size distribution reflected the removal rate of the originating polishing process. Their composition was primarily germanium and other polished substrates as well as polishing abrasives. The effluent Zeta potential was highly negative and prevented particle settling. COD of all specimens was very high, which prevented sewage discharge. Laboratory-scale trials using UF showed substantial COD abatement of up to 74.1%. TSS was reduced to zero after UF. Comparable coagulation/flocculation COD abatement was demonstrated for the highest COD sample.

Description

Software Description

Software Language

Github

Keywords

Polishing effluents, Industrial, Wastewater treatment, Analysis, Industry, Effluent

DOI

Rights

Attribution-Non-Commercial 3.0 Unported (CC BY-NC 3.0) You are free to: Share — copy and redistribute the material in any medium or format, Adapt — remix, transform, and build upon the material. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms: Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. Information: Non-Commercial — You may not use the material for commercial purposes. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
This is an Accepted Manuscript of an article published by Taylor & Francis in Desalination and Water Treatment on 27/01/2014, available online: http://www.tandfonline.com/10.1080/19443994.2014.881750.

Relationships

Relationships

Resources

Funder/s

Collections

Staff publications (SATM)