Measurement and FEM of ice adhesion to the downstream pipe of an air cycle machine

Simple item page
dc.contributor.authorFeng, An
dc.contributor.authorVincent, Abhay
dc.contributor.authorPervier, Marie L. A.
dc.date.accessioned2022-02-09T11:32:02Z
dc.date.available2022-02-09T11:32:02Z
dc.date.issued2022-02-07
dc.description.abstractIce accretion on the downstream pipe of an air cycle machine can lead to pipe blockage and turbine blade damage, and therefore de-icing is needed. Most previous studies focused on ice shedding from flat surfaces, and average interface shear strength rather than the true shear strength was usually reported. Here, the debonding of the interface between ice and cylindric surfaces of an aluminium pipe (2024-T3) was studied trying to understand the mechanism of interface fracture and to obtain the true adhesive shear strength and fracture energy. Average adhesive strength was measured first in the scrape test and the result was used to calibrate the finite element analysis. A cohesive zone model (CZM) with bilinear traction-separation law was used to simulate the interface delamination. The true shear strength σcs and mode-II energy release rate Gcs were determined by matching the numerically predicted critical force to the measured force. The influence of shear strength and shear energy release rate on the critical force was also investigated. At the interface, both the damage factor and the peak shear stress were found progressing away from the edge as the pushing force increased. Parametric studies on the influence of the length of the interface was performed. The critical force first increased and then stabilised with the increase of the length, showing the same trend as that of a theoretical model which ignored the mode-I fracture.en_UK
dc.identifier.citationFeng A, Vincent A, Pervier MLA. (2022) Measurement and FEM of ice adhesion to the downstream pipe of an air cycle machine. Cold Regions Science and Technology, Volume 196, April 2022, Article number 103512en_UK
dc.identifier.issn0165-232X
dc.identifier.urihttps://doi.org/10.1016/j.coldregions.2022.103512
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/17555
dc.language.isoenen_UK
dc.publisherElsevieren_UK
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectAir cycle machineen_UK
dc.subjectIce adhesionen_UK
dc.subjectFinite element analysisen_UK
dc.subjectCohesive zone modelen_UK
dc.subjectShear strengthen_UK
dc.subjectEnergy release rateen_UK
dc.titleMeasurement and FEM of ice adhesion to the downstream pipe of an air cycle machineen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Measurement_and_FEM_of_ice_adhesion-2022.pdf
Size:
2.8 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)