Test report No. PLBO/4: wear tests on PERPRO tools grades N35/RD25 and N35/RD80 machining EN 9
Date
1963-11
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
College of Aeronautics
Department
Type
Report
ISSN
Format
Free to read from
Citation
Abstract
Tools of grade N35/RD25 and N35/RD80 were tested at 500 fpm cutting speed, 0.010 in/rev feed and 0.10 in. depth of cut on EN 9 to 0.030 in. flankwear. The results showed that there was no significant difference in tool life between the two grades for the cutting conditions investigated.