Investigation of an Atmospheric Pressure Plasma device for reduction of water use in sustainable cleaning of concentrating solar power mirrors

Simple item page
dc.contributor.advisorKing, Peter
dc.contributor.advisorSansom, Chris
dc.contributor.authorGobey, Katherine
dc.date.accessioned2024-09-05T12:18:51Z
dc.date.available2024-09-05T12:18:51Z
dc.date.freetoread2024-09-05
dc.date.issued2023-06
dc.descriptionSansom, Chris - Associate Supervisor
dc.description.abstractConcentrating Solar Power (CSP) is a method of renewable electricity generation that uses large areas of mirrors, that reflect and focus the sun’s energy onto a receiver which is then used to heat water to power a conventional steam turbine, generating electricity. These plants are typically located in areas with consistently high levels of sunlight which are typically arid desert areas where sand and dust is deposited onto the mirrors, reducing their reflectivity and thus the plant’s output. Conventional mirror washing consumes huge quantities of water, which is costly and incurs ethical and environmental concerns in areas already experiencing water scarcity. This work investigates the use of an atmospheric pressure plasma to induce a super-hydrophilic surface on the soiled mirrors which are then able to be cleaned with significantly lower quantities of water. Characterisation of the plasma torch is conducted, and surface energy modification effects investigated with regards to water spreading, evaporation, and travel. For cleaning trials, solar type mirrors were artificially soiled with sand gathered from a CSP plant, then plasma processed before being conventionally washed with water. Mirrors that were subject to soiling were successfully washed, as determined by reflectance measurements, with up to 87.5% less water than mirrors exposed to the same artificial soiling procedure but without plasma processing prior to washing. Plasma processed samples also exhibited self-cleaning properties when subject to condensation trials, mimicking overnight dew formation. There was no observed effect in either reduction or exacerbation of subsequent resoiling of plasma processed samples. Fundamental processes behind these effects are discussed and the application and implication of the work are considered.
dc.description.coursenamePhD in Manufacturing
dc.description.sponsorshipEngineering and Physical Sciences Research Council (EPSRC)
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/22897
dc.language.isoen
dc.publisherCranfield University
dc.publisher.departmentSATM
dc.rights© Cranfield University, 2023. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder.
dc.subjectPlasma processing
dc.subjectsurface energy modification
dc.subjecthydrophilic
dc.subjectnitrogen plasma
dc.subjectdielectric barrier discharge
dc.subjectheliostats
dc.subjectmirror soiling
dc.subjectrenewable energy
dc.subjectsolar thermal
dc.subjectanti soiling
dc.subjectself cleaning
dc.titleInvestigation of an Atmospheric Pressure Plasma device for reduction of water use in sustainable cleaning of concentrating solar power mirrors
dc.typeThesis
dc.type.qualificationlevelDoctoral
dc.type.qualificationnamePhD

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Gobey_K_2023.pdf
Size:
8.06 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

PhD, EngD and MSc by research theses (SATM)