Analysis of gas turbine compressor fouling and washing on line
| dc.contributor.advisor | Pilidis, Pericles | |
| dc.contributor.author | Vigueras Zuniga, Marco Osvaldo | |
| dc.date.accessioned | 2008-03-17T19:28:30Z | |
| dc.date.available | 2008-03-17T19:28:30Z | |
| dc.date.issued | 2007 | |
| dc.description.abstract | This work presents a model of the fouling mechanism and the evaluation of compressor washing on line. The results of this research were obtained from experimental and computational models. The experimental model analyzed the localization of the particle deposition on the blade surface and the change of the surface roughness condition. The design of the test rig was based on the cascade blade arrangement and blade aerodynamics. The results of the experiment demonstrated that fouling occurred on both surfaces of the blade. This mechanism mainly affected the leading edge region of the blade. The increment of the surface roughness on this region was 1.0 μm. This result was used to create the CFD model (FLUENT). According to the results of the CFD, fouling reduced the thickness of the boundary layer region and increased the drag force of the blade. The model of fouling was created based on the experiment and CFD results and was used to calculate the engine performance in the simulation code (TURBOMATCH). The engine performance results demonstrated that in five days fouling can affect the overall efficiency by 3.5%. The evaluation of the compressor washing on line was based on the experimental tests and simulation of the engine performance. This system demonstrated that it could recover 99% of the original blade surface. In addition, this system was evaluated in a study case of a Power Plant, where it proved itself to be a techno-economic way to recover the power of the engine due to fouling. The model of the fouling mechanism presented in this work was validated by experimental tests, CFD models and information from real engines. However, for further applications of the model, it would be necessary to consider the specific conditions of fouling in each new environment. | en_UK |
| dc.identifier.uri | http://hdl.handle.net/1826/2448 | |
| dc.language.iso | en | en_UK |
| dc.publisher | Cranfield University | en_UK |
| dc.rights | © Cranfield University, 2007. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder. | en_UK |
| dc.subject | Techno-electric | en_UK |
| dc.subject | Cascade blade | en_UK |
| dc.subject | Experiment | en_UK |
| dc.subject | Roughness | en_UK |
| dc.subject | CFD | en_UK |
| dc.title | Analysis of gas turbine compressor fouling and washing on line | en_UK |
| dc.type | Thesis or dissertation | en_UK |
| dc.type.qualificationlevel | Doctoral | en_UK |
| dc.type.qualificationname | PhD | en_UK |