Process simulations of high-purity and renewable clean H2 production by sorption enhanced steam reforming of biogas

Simple item page
dc.contributor.authorCapa, Alma
dc.contributor.authorYan, Yongliang
dc.contributor.authorRubiera, Fernando
dc.contributor.authorPevida, Covadonga
dc.contributor.authorGil, María Victoria
dc.contributor.authorClough, Peter T.
dc.date.accessioned2023-03-28T15:45:59Z
dc.date.available2023-03-28T15:45:59Z
dc.date.issued2023-03-11
dc.description.abstractRenewable clean H2 has a very promising potential for the decarbonization of energy systems. Sorption enhanced steam reforming (SESR) is a novel process that combines the steam reforming reaction and the simultaneous CO2 removal by a solid sorbent, such as CaO, which significantly enhances hydrogen generation, enabling high-purity H2 production. The CO2 sorption reaction (carbonation) is exothermic, but the sorbent regeneration by calcination is highly endothermic, which requires extra energy. Biogas is one of the available carbon-neutral renewable H2 production sources. It can be especially relevant for the energy integration of the SESR process since, due to the exothermic sorption reaction, the CO2 contained in the biogas provides extra heat to the system, which can help to balance the energy requirements of the process. This work studies different process configurations for the energy integration of the SESR process of biogas for high-purity renewable H2 production: (1) SESR with sorbent regeneration using a portion of the produced H2 (SESR+REG_H2), (2) SESR with sorbent regeneration using biogas (SESR+REG_BG), and (3) SESR with sorbent regeneration using biogas and adding a pressure swing adsorption (PSA) unit for hydrogen purification (SESR+REG_BG+PSA). When using biogas as fuel (Cases 2 and 3), these configurations were studied using air and oxy-fuel combustion atmospheres in the sorbent regeneration step, resulting in five case studies. A thermodynamic approach for process modeling can provide the optimal process operating conditions and configurations that maximize the energy efficiency of the process, which are the basis for subsequent optimization of the process at the practical level needed to scale up this technology. For this purpose, process simulations were performed using a steady-state plant model developed in Aspen Plus, incorporating a complex heat exchanger network (HEN) to optimize heat integration. A comprehensive parametric study assessed the effects of biogas composition, temperature, pressure, and steam to methane (S/CH4) ratio on the process performance represented by the selected key performance indicators, i.e., H2 purity, H2 yield, CH4 conversion, cold gas efficiency (CGE), net efficiency (NE), fuel consumption for the sorbent regeneration step, and CO2 capture efficiency. H2 with a purity of 98.5 vol % and a CGE of 75.7% with zero carbon emissions can be achieved. When adding a PSA unit, nearly 100% H2 purity and CO2 capture efficiency were achieved with a CGE of 77.3%. The use of oxy-fuel combustion during regeneration lowered the net efficiency of the process by 2.3% points (since it requires an air separation unit) but allowed the process to achieve negative carbon emissions.en_UK
dc.identifier.citationCapa A, Yan Y, Rubiera F, et al., (2023) Process simulations of high-purity and renewable clean H2 production by sorption enhanced steam reforming of biogas. ACS Sustainable Chemistry and Engineering, Volume 11, Issue 12, March 27 2023, pp. 4759–4775en_UK
dc.identifier.issn2168-0485
dc.identifier.urihttps://doi.org/10.1021/acssuschemeng.2c07316
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/19365
dc.language.isoenen_UK
dc.publisherAmerican Chemical Societyen_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectBiogasen_UK
dc.subjectCH4/CO2 compositionen_UK
dc.subjectHydrogenen_UK
dc.subjectSorption enhanced steam reformingen_UK
dc.subjectProcess simulationen_UK
dc.subjectCO2 captureen_UK
dc.titleProcess simulations of high-purity and renewable clean H2 production by sorption enhanced steam reforming of biogasen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
renewable_clean_H2_production-2023.pdf
Size:
4.39 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SWEE)