Aerodynamics of a compact nacelle at take-off conditions

Simple item page
dc.contributor.authorSwarthout, Avery E.
dc.contributor.authorMacManus, David G.
dc.contributor.authorTejero, Fernando
dc.contributor.authorMatesanz García, Jesús
dc.contributor.authorGoulos, Ioannis
dc.contributor.authorBoscagli, Luca
dc.contributor.authorSheaf, Christopher T.
dc.date.accessioned2023-07-05T09:23:10Z
dc.date.available2023-07-05T09:23:10Z
dc.date.issued2023-06-08
dc.description.abstractNext generation ultra-high bypass ratio turbofans may have larger fan diameters than the previous generation of aircraft engines. This will potentially increase the nacelle diameter and may incur penalties to the weight and drag of the powerplant. To offset these penalties, a more compact nacelle may be used. Compact nacelles may be more sensitive to boundary layer separation at the end-of-runway conditions, particularly at an off-design windmilling operating point. Additionally, the flow separation on the external cowl surface is likely to be influenced by the integration between the powerplant, pylon and airframe. The publicly available NASA high lift common research model (HL-CRM) with take-off flap and slat settings was modified to accommodate an ultra-high bypass ratio powerplant. The powerplant has an intake, separate jet exhaust, external cowl and pylon. Boundary layer separation on the external cowl of the compact powerplant is assessed at end-of-runway rated take-off and take-off windmilling scenarios. Additionally, the lift curve and Cp distributions of the high lift common research model (HL-CRM) are compared for rated take-off and take-off windmilling engine mass flows. Overall, the nacelle boundary layer separates from the nacelle highlight at windmilling conditions when the engine mass flow is relatively low. The mechanism of separation at windmilling conditions is diffusion driven and is initiated on the nacelle aft-body. The pylon has a small impact on the overall mechanism of separation. However, the wing and high-lift devices of the HL-CRM introduce local separation on the external cowl. The HL-CRM wing with the installed powerplant stalls at a similar angle (αa/c = 16°) to the HL-CRM with the through flow nacelle available in the open literature. Compared with the nominal take-off condition, the maximum lift coefficient of the HL-CRM airframe was reduced by about 2% under windmilling engine mass flows.en_UK
dc.identifier.citationSwarthout A, MacManus D, Tejero F, et al., (2023) Aerodynamics of a compact nacelle at take-off conditions. In: 2023 AIAA Aviation and Aeronautics Forum and Exposition (AIAA AVIATION Forum), 12-16 June 2023, San Diego, USA. Paper number AIAA 2023-3309en_UK
dc.identifier.eisbn978-1-62410-704-7
dc.identifier.isbn978-1-62410-704-7
dc.identifier.urihttps://doi.org/10.2514/6.2023-3309
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/19927
dc.language.isoenen_UK
dc.publisherIEEEen_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleAerodynamics of a compact nacelle at take-off conditionsen_UK
dc.typeConference paperen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Aerodynamics_of_a_compact_nacelle_at_take-off_conditions-2023.pdf
Size:
1.28 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)