Development of CNC prototype for the characterization of the nanoparticle release during physical manipulation of nanocomposites

Simple item page
dc.contributor.authorGendre, Laura
dc.contributor.authorMarchante, Veronica
dc.contributor.authorAbhyankar, Hrushikesh
dc.contributor.authorBlackburn, Kim
dc.contributor.authorTemple, Clive
dc.contributor.authorBrighton, James L.
dc.date.accessioned2019-12-13T15:59:43Z
dc.date.available2019-12-13T15:59:43Z
dc.date.issued2016-02-18
dc.description.abstractThis work focuses on the release of nanoparticles from commercially used nanocomposites during machining operations. A reliable and repeatable method was developed to assess the intentionally exposure to nanoparticles, in particular during drilling. This article presents the description and validation of results obtained from a new prototype used for the measurement and monitoring of nanoparticles in a controlled environment. This methodology was compared with the methodologies applied in other studies. Also, some preliminary experiments on drilling nanocomposites are included. Size, shape and chemical composition of the released nanoparticles were investigated in order to understand their hazard potential. No significant differences were found in the amount of nanoparticles released between samples with and without nanoadditives. Also, no chemical alteration was observed between the dust generated and the bulk material. Finally, further developments of the prototype are proposed.en_UK
dc.identifier.citationGendre L, Marchante Rodriguez V, Abhyankar H, et al., (2016) Development of CNC prototype for the characterization of the nanoparticle release during physical manipulation of nanocomposites. Journal of Environmental Science and Health, Part A: Toxic Hazardous Substances and Environmental Engineering, Volume 51, Issue 6, 2016, pp. 459-501en_UK
dc.identifier.cris5570167
dc.identifier.issn1093-4529
dc.identifier.urihttps://doi.org/10.1080/10934529.2015.1128720
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/14835
dc.language.isoenen_UK
dc.publisherTaylor & Francisen_UK
dc.rightsAttribution-NonCommercial 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/*
dc.subjectCommercial nanocompositesen_UK
dc.subjectmachiningen_UK
dc.subjectnanosafetyen_UK
dc.subjectstandardizationen_UK
dc.titleDevelopment of CNC prototype for the characterization of the nanoparticle release during physical manipulation of nanocompositesen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Development_of_CNC_prototype_for_the_characterization_of_the_nanoparticle-2016.pdf
Size:
1.75 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)