Remote ultrasonic imaging of a wire arc additive manufactured Ti-6AI-4V component using laser induced phased array
dc.contributor.author | Lukacs, Peter | |
dc.contributor.author | Davis, Geo | |
dc.contributor.author | Stratoudaki, Theodosia | |
dc.contributor.author | Williams, Stewart | |
dc.contributor.author | MacLeod, Charles N. | |
dc.contributor.author | Gachagan, Anthony | |
dc.date.accessioned | 2021-08-17T10:31:35Z | |
dc.date.available | 2021-08-17T10:31:35Z | |
dc.date.issued | 2021-06-28 | |
dc.description.abstract | Additive manufacturing (AM) has been revolutionizing the manufacturing industry due to its ability to significantly reduce waste and produce components with intricate shapes. Laser Ultrasonics (LU) is a non-contact and couplant free method to generate and detect ultrasound. LU can accommodate complex component shapes; thus, it has the potential to provide a reliable in-process inspection method for AM components. In recent years the development of Laser Induced Phased Arrays (LIPAs) helped overcome the inherently low signal amplitudes of LU at the non-destructive, thermoelastic regime. In this paper, the Full Matrix Capture data acquisition method is used and a LIPA of 68 elements is synthesized in post processing. The Total Focusing Method imaging algorithm is applied for ultrasonic imaging. The technique is demonstrated on a highly scattering titanium alloy Wire Arc Additive Manufactured (WAAM) component producing high quality ultrasonic images, accurately imaging defects at depths up to 10mm below the inspection surface | en_UK |
dc.identifier.citation | Lukacs P, Davis G, Stratoudaki T, et al., (2021) Remote ultrasonic imaging of a wire arc additive manufactured Ti-6AI-4V component using laser induced phased array. In: 2021 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 17-20 May 2021, Glasgow | en_UK |
dc.identifier.issn | 2642-2077 | |
dc.identifier.uri | https://doi.org/10.1109/I2MTC50364.2021.9459823 | |
dc.identifier.uri | https://dspace.lib.cranfield.ac.uk/handle/1826/17000 | |
dc.language.iso | en | en_UK |
dc.publisher | IEEE | en_UK |
dc.rights | Attribution-NonCommercial 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/4.0/ | * |
dc.subject | remote sensing | en_UK |
dc.subject | additive manufacturing | en_UK |
dc.subject | ultrasonic imaging | en_UK |
dc.subject | laser ultrasonics | en_UK |
dc.title | Remote ultrasonic imaging of a wire arc additive manufactured Ti-6AI-4V component using laser induced phased array | en_UK |
dc.type | Conference paper | en_UK |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Remote_ultrasonic_imaging_of_wire_arc_additive_manufactured_Ti-6AI-4V-2021.pdf
- Size:
- 1.77 MB
- Format:
- Adobe Portable Document Format
- Description:
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.63 KB
- Format:
- Item-specific license agreed upon to submission
- Description: