Test report No. PLBO/3: wear tests on PERPRO tools grades N35/3 and N35/RD25 machining EN 9
| dc.contributor.author | College of Aeronautics, (Cranfield) | |
| dc.date.accessioned | 2016-10-20T15:12:20Z | |
| dc.date.available | 2016-10-20T15:12:20Z | |
| dc.date.issued | 1963-10 | |
| dc.description.abstract | Tools of grade N35/3 and N35/RD25 were tested to .030 in. flankwear at cutting speeds of 500 fpm with 0.010 in/rev feed and 250 fpm. with 0.010 in/rev feed and 0.030 in/rev feed machining EN 9. The results showed that N35/3 gave the better performance at the higher cutting speed and that the two grades gave the same performance at the lower speed. At 250 fpm and 0.010 in/rev feed the wear of both grades was mostly confined to a groove at the depth of cut. With the larger feed both grades of tool suffered severe deformation of the cutting edge. | en_UK |
| dc.identifier.uri | http://dspace.lib.cranfield.ac.uk/handle/1826/10804 | |
| dc.language.iso | en | en_UK |
| dc.publisher | College of Aeronautics | en_UK |
| dc.relation.ispartofseries | CoA/M/M&P-7 | en_UK |
| dc.relation.ispartofseries | 7 | en_UK |
| dc.title | Test report No. PLBO/3: wear tests on PERPRO tools grades N35/3 and N35/RD25 machining EN 9 | en_UK |
| dc.type | Report | en_UK |