Devices and methods for wet gas flow metering: a comprehensive review

Wet gas is commonly encountered in various industries, including energy, chemical, and electric power sectors. For example, natural gas extracted from production often contains small amounts of liquid, such as water and hydrocarbon condensates, which classifies it as wet gas. The presence of liquid within the gas poses challenges for accurate flow measurement. To improve the performances of wet gas flow metering methods, significant research and development efforts have been invested into the wet gas flow metering technologies due to their vital importance in the production, transfer, and trade benefits.

This paper presents a comprehensive overview of the recent development of wet gas flow metering. Firstly, a comprehensive discussion of the Lockhart-Martinelli parameter (Xlm) and its relation to the gas void fraction (Óg) is presented, which was mostly overlooked in previous wet gas research work. The occurrence of various flow patterns in wet gas conditions at different orientations (horizontal and vertical) was explored. Following an investigation of pressure impact on the wet gas flow patterns and development of the wet gas regions, a different test matrix for further research work was suggested. After a novel classification of wet gas measurement methods, the paper offers a detailed comparison of differential pressure (DP) meters including Venturi, Cone meter, and orifice meters, by considering both liquid and gas flow rate measurements. Secondly, the paper discusses and compares vortex flow meters, Coriolis and ultrasonic meters in comparison to DP meters. Notable phase fraction meters are also examined and compared to one another. Thirdly, the paper reviewed the concept of existing and potential hybrid wet gas meters, conducting a detailed discussion and comparison with commercial solutions by evaluating their ranges and accuracies. This assessment provides valuable insights into the capabilities of these hybrid meters, highlighting their potential to enhance the measurement of wet gas flow rates.