Applying trade-off curve to support set-based design application in an aerospace company

Simple item page
dc.contributor.authorMohsin, Esraa M.
dc.contributor.authorAbdulateef, Osamah F.
dc.contributor.authorAl-Ashaab, Ahmed
dc.date.accessioned2020-12-11T14:57:00Z
dc.date.available2020-12-11T14:57:00Z
dc.date.issued2020-12-01
dc.description.abstractCompanies compete greatly with each other today, so they need to focus on innovation to develop their products and make them competitive. Lean product development is the ideal way to develop product, foster innovation, maximize value, and reduce time. Set-Based Concurrent Engineering (SBCE) is an approved lean product improvement mechanism that builds on the creation of a number of alternative designs at the subsystem level. These designs are simultaneously improved and tested, and the weaker choices are removed gradually until the optimum solution is reached finally. SBCE implementations have been extensively performed in the automotive industry and there are a few case studies in the aerospace industry. This research describe the use of trade-off curve as a lean tool to support SBCE process model in CONGA project, using NASA simulation software version 1.7c and CONGA demonstration program (DEMO program) to help designers and engineers to extract the design solution where it exists according to the customer requirement and to extract alternative nearest solutions from the previous project that meet customer requirement to achieve low noise engine at an aerospace company and also extract the infeasible region where the designers cannot make any prototype in this region before manufacturing process begin, that will lead to reducing rework, time and cost.en_UK
dc.identifier.citationMohsin EM, Abdulateef OF, Al-Ashaab A. (2020) Applying trade-off curve to support set-based design application in an aerospace company. Al-Khwarizmi Engineering Journal, Volume 16, Issue 4, December 2020, pp. 1-10en_UK
dc.identifier.issn1818-1171
dc.identifier.urihttps://doi.org/10.22153/kej.2020.10.001
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/16081
dc.language.isoenen_UK
dc.publisherInstitut Agama Islam Negerien_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectKnowledge managementen_UK
dc.subjectLean product developmenten_UK
dc.subjectSBCEen_UK
dc.subjectTrade-off curveen_UK
dc.titleApplying trade-off curve to support set-based design application in an aerospace companyen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
set-based_design_application-aerospace_company-2020.pdf
Size:
877.45 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)