Micromechanical modeling of architected piezoelectric foam with simplified boundary conditions for hydrophone applications

Simple item page
dc.contributor.authorKhan, Kamran Ahmed
dc.contributor.authorAlarafati, Hamad K.
dc.contributor.authorKhan, Muhammad Ali
dc.date.accessioned2021-01-20T15:06:23Z
dc.date.available2021-01-20T15:06:23Z
dc.date.issued2021-01-05
dc.description.abstractArchitected piezoelectric materials with controlled porosity are of interest for applications such as hydrophones, miniature accelerometers, vibratory sensors, and contact microphones. Current analytical modeling approach cannot be readily applied to design architected periodic piezoelectric foams with tunable properties while exhibiting elastic anisotropy and piezoelectric activity. This study presents micromechanical-finite element (FE) models to characterize the electromechanical properties of architected piezoelectric foams. The microstructure with zero-dimension (3-0 foam, spherical porosity) and one-dimensional (3-1 foam, cylindrical porosity) connectivity were considered to analyze the effect of porosity connectivity on the performance of piezoelectric foam. 3D FE models of the 3-0 and 3-1 foams were developed and using the intrinsic symmetry of porous structures simplified mixed boundary conditions (MBCs) equivalent to periodic boundary conditions (PBC) were proposed. The proposed approach is simple and eliminates the need of tedious mesh generation process on opposite boundary faces on the micromechanical model of porous microstructures with PBCs. The results obtained from the proposed micromechanics-FE models were compared with those obtained by means of the analytical models based on micromechanics theories, and FE models with PBCs reported in the literature for both 3-0 and 3-1 type foams. An excellent agreement was observed. The computed effective elastic, piezoelectric and dielectric properties and corresponding figure of merit (FOM) revealed that piezoelectric foams with 3-0 connectivity exhibit enhanced hydrostatic FOM as compared to piezoelectric foams with 3-1 connectivity. It is concluded that spherical porosity is more suitable to hydrophone applications.en_UK
dc.identifier.citationKhan KA, Alarafati HK, Khan MA. (2021) Micromechanical modeling of architected piezoelectric foam with simplified boundary conditions for hydrophone applications. Journal of Intelligent Material Systems and Structures, Volume 32, Issue 15, September 2021, pp. 1700-1712en_UK
dc.identifier.issn1045-389X
dc.identifier.urihttps://doi.org/10.1177/1045389X20983912
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/16210
dc.language.isoenen_UK
dc.publisherSAGEen_UK
dc.rightsAttribution-NonCommercial 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/*
dc.subjectFinite element analysisen_UK
dc.subjectelectromechanical propertiesen_UK
dc.subjectarchitected porous materialsen_UK
dc.subjectunit cell methoden_UK
dc.subjectpiezoelectric materialsen_UK
dc.titleMicromechanical modeling of architected piezoelectric foam with simplified boundary conditions for hydrophone applicationsen_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Micromechanical_modeling_of_architected_piezoelectric_foam-2021.pdf
Size:
2.17 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)