Calibration of pesticide leaching models

Simple item page
dc.contributor.advisorBrown, Colin D.
dc.contributor.authorDubus, Igor G.
dc.date.accessioned2023-01-19T16:20:28Z
dc.date.available2023-01-19T16:20:28Z
dc.date.issued2002-09
dc.description.abstractComplex deterministic models are being used within the context of pesticide registration to assess the potential for crop protection products to impact on the environment. Although calibration is in many ways at the heart of pesticide fate modelling, it has received little attention in the past. Sensitivity analyses were carried out for the four main leaching models used for pesticide registration in Europe (PELMO, PRZM, PESTLA and MACRO) using four different leaching scenarios and two approaches to sensitivity assessment (one-at-a-time and Monte Carlo sensitivity analyses). Also, an inverse modelling approach was used to estimate values for sorption and degradation parameters from leaching data for seven lysimeters using the PESTRAS model. The overall conclusions of the PhD can be summarised as follows: 1. Sensitivity analyses for the four leaching models mainly used for pesticide registration in Europe demonstrated that predictions for pesticide loss are most sensitive to parameters related to sorption and degradation. In a small number of scenarios, hydrological parameters were found to also have a large influence on predictions for pesticide loss. 2. Sensitivity analysis proved to be an effective approach not only for ranking parameters according to their influence on model predictions, but also for investigating model behaviour in a more general context. However, the research questioned the robustness of the Monte Carlo approach to sensitivity analysis as issues of replicability were uncovered. 3. Inverse modelling exercises demonstrated that non-uniqueness is likely to be widespread in the calibration of pesticide leaching models. Correlation between parameters within the modelling, such as that between sorption and degradation parameters when predicting pesticide leaching, may prevent the robust derivation of values through an inverse modelling approach. Depending on the calibration system considered, these parameters may act as fitting variables and integrate inaccuracies, uncertainties and limitations associated with experimental data, modelling and calibration. 4. A special implementation of error surface analysis termed lattice modelling was proposed in the PhD as an efficient technique to i) assess the likely extent of nonuniqueness issues in the calibration of pesticide leaching models; and, ii) replace traditional parameter estimation procedures where non-uniqueness is expected. Care should be exercised when assessing the results obtained by both modelling and inverse modelling studies. Suggestions to improve the reliability in the calibration of pesticide leaching models have been proposed.en_UK
dc.description.coursenamePhDen_UK
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/19002
dc.language.isoenen_UK
dc.rights© Cranfield University, 2015. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder.
dc.titleCalibration of pesticide leaching modelsen_UK
dc.typeThesisen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Dubus_I 2002 PhD 4600354102 10832230.pdf
Size:
7.25 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

PhD, EngD, DM and MSc by research theses (Silsoe)