The characteristics of a modern oxy-fuel power plant

Simple item page
dc.contributor.authorKotowicz, Janusz
dc.contributor.authorMichalski, Sebastian
dc.contributor.authorBrzęczek, Mateusz
dc.date.accessioned2019-09-05T17:25:47Z
dc.date.available2019-09-05T17:25:47Z
dc.date.issued2019-09-02
dc.description.abstractThis paper presents the thermodynamic and economic analyses of four variants of a supercritical oxy-type plant. These variants differed in terms of air separation units (ASU, variants: V1—cryogenic; V2—hybrid; equipped with a three-end (V3a) or four-end (V3b) high-temperature membrane) and boilers (V1 and V3a—lignite-fired fluidized-bed; V2 and V3b—hard-coal-fired pulverized-fuel). The gross power of steam turbine unit (STU) was 600 MW. The live and reheated steam parameters were 650 °C/30 MPa and 670 °C/6.5 MPa, respectively. The influence of the ASUs’ operating parameters on the ASUs’ auxiliary power rate and boiler efficiency (V3a and V3b only) was studied. The ASUs’ operating parameters for maximum net efficiency were then determined. The decrease in the net efficiency compared to a reference plant (with a classic fluidized-bed or pulverized-fuel boiler) fluctuated in the range 7.2 (V3b)–11.2 (V1) p.p. An analysis of the waste heat utilization was performed (fuel drying—V1 and V3a; STU steam-water heat exchangers replacing). Thus, the efficiency decreases fluctuated in the range 4.3 (V3b)–10.2 (V1) p.p. The economic analysis showed that in order for the variants to be economically viable, the unit CO2 emission cost should be greater than 42.2 (V1) or 22.0 (V3b) EUR/MgCO2.en_UK
dc.identifier.citationKotowicz J, Michalski S, Brzęczek M. The characteristics of a modern oxy-fuel power plant. Energies, Volume 12, Issue 17, 2019, Article number 3374en_UK
dc.identifier.issn1996-1073
dc.identifier.urihttps://doi.org/10.3390/en12173374
dc.identifier.urihttp://dspace.lib.cranfield.ac.uk/handle/1826/14516
dc.language.isoenen_UK
dc.publisherMDPIen_UK
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectoxy-fuel power planten_UK
dc.subjectair separation uniten_UK
dc.subjectCO2 capture uniten_UK
dc.subjectCO2 compression uniten_UK
dc.subjectclean energyen_UK
dc.titleThe characteristics of a modern oxy-fuel power planten_UK
dc.typeArticleen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
characteristics_of_a_modern_oxy-fuel_power_plant-2019.pdf
Size:
1.33 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.63 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SWEE)