Residual Stress Characterization and Control in the Additive Manufacture of Large Scale Metal Structures

Simple item page
dc.contributor.authorWilliams, Stewart W.
dc.contributor.authorColegrove, Paul A.
dc.contributor.authorGanguly, Supriyo
dc.date.accessioned2017-02-24T16:48:38Z
dc.date.available2017-02-24T16:48:38Z
dc.date.issued2016-12-22
dc.description.abstractAdditive Manufacture of metals is an area of great interest to many industrial sectors. All metal additive manufacturing processes suffer with problems of residual stresses and subsequent distortion or performance issues. Wire + Arc Additive Manufacture (WAAM) is a metal additive manufacture process that is suitable for the production of large scale engineering structures. Paramount to the successful industrial application of WAAM is the understanding and control of residual stress development and their subsequent effects. Vertical inter-pass rolling can be used to reduce these residual stresses, but its potential is limited due to the absence of lateral restraint of the wall. So it deforms the wall in its transverse direction rather than reducing longitudinal tensile residual stresses, which is the main source of the distortion. The potential of a new pinch-roller concept is currently being investigated at Cranfield University with very promising preliminary results: It was possible to entirely eliminate the distortion of a Ti 6Al 4V WAAM wall.en_UK
dc.identifier.citationRoy MJ, Williams S, Colegrove P, et al., Residual stress characterization and control in the additive manufacture of large scale metal structures. Residual Stresses 2016 – International Conference on Residual Stresses (ICRS-10), 3 - 7 July 2016, Sydney, Australia, Vol. 2, pp. 455-460en_UK
dc.identifier.urihttp://dx.doi.org/10.21741/9781945291173-77
dc.identifier.urihttps://dspace.lib.cranfield.ac.uk/handle/1826/11498
dc.language.isoenen_UK
dc.publisherMaterials Research Forum LLCen_UK
dc.rightsAttribution 3.0 Unported
dc.rights.urihttps://creativecommons.org/licenses/by/3.0/
dc.subjectAdditive Manufacturingen_UK
dc.subjectNeutron Diffractionen_UK
dc.subjectContour Methoden_UK
dc.subjectCold Rollingen_UK
dc.subjectPinch Rollingen_UK
dc.titleResidual Stress Characterization and Control in the Additive Manufacture of Large Scale Metal Structuresen_UK
dc.typeConference paperen_UK

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Residual_Stress_Characterization_and_Control_in_the_Additive-2016.pdf
Size:
3.25 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.79 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Staff publications (SATM)