Membrane Gas Absorbers for H2S Removal - Design, Operation and Technology Integration into Existing Odour Treatment Strategies.
Date published
Free to read from
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
Department
Type
ISSN
Format
Citation
Abstract
A hollow fibre (HF) polypropylene membrane gas absorber was investigated for the removal of hydrogen sulphide (H2S) from gas streams. Gas concentrations between 25-2010 ppmV were fed into the shell side of a membrane module whilst water-NaOH solutions flowed counter-currently in the fibre lumens. The process was effective at removing the H2S (96% at G:L ratios up to 50 and pH 13) from the gas phase in a single pass through the membrane at all the concentrations of H2S investigated. Analysis of the mass transfer process revealed the rate of transfer to be controlled by the gas phase transfer coefficient with a value between 1 and 25Ã 10-4 m.s-1. The possible integration of a membrane absorber system into existing odour treatment strategies was assessed by comparing the membrane system, based on the experimentally determined mass transfer coefficient, with existing full scale biofiltration plants. The membrane system became economically favourable at gas flow rates lower than 1630 m3.h-1