An investigation into the basic mechanics of orthogonal machining

Enahoro, H.

dc.contributor.author	Enahoro, H.
dc.date.accessioned	2016-02-19T14:18:01Z
dc.date.available	2016-02-19T14:18:01Z
dc.date.issued	19
dc.identifier.uri	http://dspace.lib.cranfield.ac.uk/handle/1826/9708
dc.description.abstract	Three machines were modified to enable orthogonal cuts to be taken over a speed range of 0.04 in per min to 50 ft per min. The very low speed films were used to verify an analytical solution to the cutting operation at the tool point. Over the whole range the results showed some agreement with other research results.	en_UK
dc.language.iso	en	en_UK
dc.publisher	College of Aeronautics	en_UK
dc.relation.ispartofseries	CoA/M-182	en_UK
dc.relation.ispartofseries	182	en_UK
dc.title	An investigation into the basic mechanics of orthogonal machining	en_UK
dc.type	Report	en_UK