Browsing International Conference on Manufacturing Research (ICMR 2013) by Publication Date

Browsing International Conference on Manufacturing Research (ICMR 2013) by Publication Date

Sort by: Order: Results:

  • Tan, Hao; Liu, Chuang; Chen, Hui; Wang, Junbiao (Cranfield University Press, 2013-09-19)
    Aircraft sheet metal part manufacturing is a knowledge-intensive process, and the manufacturability and manufacturing information are required to be considered in three-dimensional (3D) model by knowledge reuse. This paper ...
  • Shafik, M; Fekkai, S (Cranfield University Press, 2013-09-19)
    This paper presents an interactive tactile graphical display, for the visually impaired information technology access applications. The display consists of a matrix of dots. Each dot is an electro rheological micro actuator. ...
  • McAndrew, Ian; Moran, Katherine; Little, Andrew (Cranfield University Press, 2013-09-19)
    Fighter pilots’ helmets have become more complex and heavier resulting in long term implications to pilots musculoskeletal systems as they fly and experience high g-load. Current research has identified design changes to ...
  • Singh, Lakhvir; Ziarati, Martin; Ziarati, Reza (Cranfield University Press, 2013-09-19)
    This paper reports on the conception of a collaborative, internet-based innovation platform with semantic capabilities, which implements a new methodology for the adoption of a systematic innovation process in globally-acting ...
  • Mullan, M; Price, M; Murphy, A; Quinn, D; Butterfield, J; Cowan, S; McElroy, P; Hawthorne, P; Robertson, S (Cranfield University Press, 2013-09-19)
    The automation of complex manufacturing operations can provide significant savings over manual processes, and there remains much scope for increasing automation in the production of large scale structural composites. However ...
  • Al-Ashaab, Ahmed; Golob, Matic; Noriega, Paula; Torriani, Filippo; Alvarez, Pedro; Beltran, Ana; Busachi, Alessandro; Ex-Ignotis, Lambert; Rigatti, Carlotta; Sharma, Sanjiv (Cranfield University Press, 2013-09-19)
    The Configuration Optimisation of Next-Generation Aircraft (CONGA) is a proposed framework in a response industrial need to enhance the aerospace capability in the UK. In order to successfully address this challenge, a ...
  • Muni Prasad, Giddaluru; James, Gao; Raj, Bhatti; Satya, Shah (Cranfield University Press, 2013-09-19)
    Product Lifecycle Management (PLM) system implementation is a major investment when the technology is used in manufacturing companies. This paper provides an analysis of the requirements for the integration of PLM systems ...
  • Tseng, Kevin C; Chien-Lung, Hsu (Cranfield University Press, 2013-09-19)
    In this study, we summarise the requirements for collaborative product development based on our investigation of the differences in the resources and tools that are needed for the various stages of collaborative product ...
  • Rehman, Fayyaz; Burman, Blake (Cranfield University Press, 2013-09-19)
    This project consists of researching, designing, developing, prototyping and testing a device that clamps onto a wheelie bin and easily compresses the waste inside. Once attached, by pulling on the lever, the device will ...
  • Heinicke, Matthias; Stefan, Lüdecke; Gerd, Wagenhaus (Cranfield University Press, 2013-09-19)
    Based on a comprehensive prototype, the researchers at the Otto von Guericke University systematically investigate components and system solutions within a project regarding the interplay of electric vehicles and range ...
  • Öpöz, Tahsin; Chen, Xun (Cranfield University Press, 2013-09-19)
    This paper presents recent investigation of the material removal mechanism in single grit grinding test. Single grit scratches were generated experimentally by using CBN grit on En24T steel and compared with numerical ...
  • Mittal, Mayank; Dwivedi, Dheerendra (Cranfield University Press, 2013-09-19)
    In the present paper, fatigue and metallurgical behaviour of weld-bonds and adhesive bonds developed using 2 mm thick aluminium alloys namely 5052 alloy have been reported. Weld-bonds were prepared using structural adhesive ...
  • Xiu-quan, Cheng; Qin-xiang, Xia; Jia-zi, Wang; Dong-he, Li (Cranfield University Press, 2013-09-19)
    As an important power transmission part, pulleys are widely used in automobile industry, agricultural machinery, pumps and machines. A near-net forming process for six-wedge belt pulleys manufacturing was put forward. For ...
  • Tahir, Waseem; Jaffery, Husain; Ali, Liaqat; Khan, Mushtaq; Butt, Shahid; Jaffery, Mehdi (Cranfield University Press, 2013-09-19)
    In this research, liquid Argon is used as a cryogenic media to optimize the cutting parameters for evaluation of tool flank wear width of Tungsten Carbide Insert (CNMG 120404-WF 4215) while turning high strength alloy ...
  • Hussain, Amjad; Case, Keith; Marshall, Russell; Summerskill, Steve (Cranfield University Press, 2013-09-19)
    Traditional manufacturing work practices do not consider human variability issues during the design process. However, most manual assembly activities demand high levels of repetition and speed without compromising product ...
  • Neumann, Patrick; Village, Judy; Greig, Michael; Wells, Richard (Cranfield University Press, 2013-09-19)
    Establishing indicators for managing human factors (HF) aspects in the design of production systems remains a challenge. We address the problem in two dimensions – firstly, what aspects of HF are to be considered, and ...
  • Szwejczewski, Marek; Sweeney, Michael; Butler, Michael (Cranfield University Press, 2013-09-19)
    The idea of continuous improvement is familiar to most managers and there are many examples of how its use can increase a company’s overall performance. However, while numerous companies have adopted the approach, very few ...
  • Schneider, Ulrich; Drust, Manuel; Diaz Posada, Julian; Verl, Alexander (Cranfield University Press, 2013-09-19)
    A series of mechanical properties and disturbances limit the accuracy achievable in robotic applications. External control of the end effector position is commonly known as being an appropriate mean to increase accuracy. ...
  • Hasan, Reaz; Baddage, S; Perera, Noel; Persson, Martin (Cranfield University Press, 2013-09-19)
    The paper describes a methodology to determine the heating mechanism of steel wire inside a tube furnace used for annealing. The approach is based on Lumped Heat Capacity method of heating where the ‘surface heat transfer ...
  • Rakhodaei, Hamid; Rastegarpanah, Alireza; Ding, Chengjian; Saadat, Mozafar (Cranfield University Press, 2013-09-19)
    This paper presents a singularity-free path planning approach for a hybrid parallel robot. The hybrid robot is composed of two well-known parallel robots, a hexapod and a tripod, that are serially connected. In this paper ...

Search CERES


Browse

My Account