CERES Home
→
School of Aerospace, Transport and Manufacturing (SATM)
→
Staff publications (SATM)
→
Browsing Staff publications (SATM) by Author

Browsing Staff publications (SATM) by Author "Esperon Miguez, Manuel"

Now showing items 1-10 of 10

Downtime uncertainty reduction through the correct implementation of health monitoring tools

Esperon Miguez, Manuel; John, Philip; Jennions, Ian K. (IEEE, 2013-05-30)

The objective of Integrated Vehicle Health Management (IVHM) is to increase platform availability and reduce maintenance times and costs through the use of health monitoring on key systems. The information generated using ...
A feasibility study on the implementation of visibility algorithms for fault diagnosis in aircraft fuel systems

Esperon Miguez, Manuel; Uriondo, Adrian; Rodriguez, Jorge; Luque, Bartolo; Jennions, Ian K. (Prognostics and Health Management Society, 2019-07-03)

This paper discusses the applicability of Visibility Algorithms to detect faults in condition monitoring applications. The general purpose of Visibility Algorithms is to transform time series into graphs and study them ...
Implementing IVHM on legacy aircraft: progress towards identifying an optimal combination of technologies

Esperon Miguez, Manuel; Jennions, Ian K.; John, Philip (Springer, 2013-10-30)

The aim of Integrated VehicleHealth Management(IVHM) is to improve the management of maintenance operations through the implementation of health monitoring tools on key components either by diagnosing deterioration or by ...
Integrating IVHM and Asset Design

Jennions, Ian K.; Niculita, Octavian; Esperon Miguez, Manuel (Prognostics and Health Management Society, 2016-10-31)

Integrated Vehicle Health Management (IVHM) describes a set of capabilities that enable effective and efficient maintenance and operation of the target vehicle. It accounts for the collection of data, conducting analysis, ...
Model updating of a helicopter stub wing

Mares, Cristinel; Esperon Miguez, Manuel (International Stress Management Association (ISMA), 2012-09-19)

In this paper we describe the process of optimization for the structural model of a helicopter stub-wing based on experimental data. The wing dynamics is updated using the ground vibration tests within the 0-80Hz frequency ...
The present and future of additive manufacturing in the aerospace sector: a review of important aspects

Uriondo, Adrian; Esperon Miguez, Manuel; Perinpanayagam, Suresh (SAGE, 2015-01-28)

This paper reviews recent improvements in additive manufacturing technologies, focusing on those which have the potential to produce and repair metal parts for the aerospace industry. Electron beam melting, selective laser ...
A qualification procedure to manufacture and repair aerospace parts with electron beam melting

Portoles, L.; Jorda, O.; Jorda, Laurent; Uriondo Del Pozo, Adrian; Esperon Miguez, Manuel; Perinpanayagam, Suresh (Elsevier, 2016-08-03)

This paper is focused on qualification procedures for metal parts manufactured using new additive manufacturing (AM) techniques in the aerospace industry. The main aim is to understand the interaction between these ...
A review of physics-based models in prognostics: application to gears and bearings of rotating machinery

Cubillo, Adrian; Perinpanayagam, Suresh; Esperon Miguez, Manuel (Hindawi Publishing Corporation / SAGE Publications, 2016-08-26)

Health condition monitoring for rotating machinery has been developed for many years due to its potential to reduce the cost of the maintenance operations and increase availability. Covering aspects include sensors, signal ...
Simulating faults in a Boeing 737-200 environmental control system using a thermodynamic model

Esperon Miguez, Manuel; Jennions, Ian K.; Escobar, Ignacio Camacho; Hanov, Nile (Prognostics and Health Management Society, 2020-01-13)

The Environmental Control Systems (ECS), used to provide air to the aircraft cabin at the correct pressure and temperature, is a key driver of maintenance interruptions for military and civil aircraft. Fault detection is ...
Uncertainty of performance requirements for IVHM tools according to business targets

Esperon Miguez, Manuel; John, Philip; Jennions, Ian K. (PHM Society, 2024-07-05)

Operators and maintainers are faced with the task of selecting which health monitoring tools are to be acquired or developed in order to increase the availability and reduce operational costs of a vehicle. Since these ...

Browsing Staff publications (SATM) by Author "Esperon Miguez, Manuel"

Browsing Staff publications (SATM) by Author "Esperon Miguez, Manuel"

Search CERES

Browse

All of CERES

This Collection

My Account