Browsing School of Aerospace, Transport and Manufacturing (SATM) by Title

Browsing School of Aerospace, Transport and Manufacturing (SATM) by Title

Sort by: Order: Results:

  • Honarvar Shakibaei Asli, Barmak; Flusser, Jan; Zhao, Yifan (IEEE, 2019-12-19)
    This work proposes a new approach to find the generating function (GF) of the Zernike polynomials in two dimensional form. Combining the methods of GFs and discrete-time systems, we can develop two dimensional digital ...
  • Lee, Lucie Alexandra; McAndrew, Anthony; Buhr, Clement; Beamish, K. A.; Colegrove, Paul A. (Technological Educational Institute of Eastern Macedonia and Thrace, 2015)
    Most examples of linear friction weld process models have focused on joining two identically shaped workpieces. This article reports on the development of a 2D model, using the DEFORM finite element package, to investigate ...
  • Hallam, Jonathan M.; Rigas, Evangelos; Charrett, Thomas O. H.; Tatam, Ralph P. (MDPI, 2020-03-27)
    A dual beam optical coherence tomography (OCT) instrument has been developed for flow measurement that offers advantages over microscope derived imaging techniques. It requires only a single optical access port, allows ...
  • Jin, Wen-wu.; Li, He-Jun.; Zou, Ji-zhao; Inguva, Saikumar; Zhang, Qi; Zeng, Shao-zhong; Xu, Guo-zhong; Zeng, Xie-rong (Elsevier, 2019-05-29)
    Alleviating volume expansion of the electrodes and improving utilization of the active materials have become key problems restricting a successful commercialization of lithium-selenium batteries. In this paper, a 2D ultrathin ...
  • Khan, Kamran Ahmed; Khan, Muhammad Ali (Elsevier, 2018-12-18)
    This study presents the electromechanical properties of the 3-3 piezoelectric metamaterial based on variants of honeycomb (HC) structure. Three kinds of three-dimensional (3D) elastically anisotropic and piezoelectrically ...
  • Oyekan, John; Hutabarat, Windo; Turner, Christopher; Tiwari, Ashutosh; Prajapat, Neha; Ince, Nadir; Gan, Xiao-Peng; Waller, Tony (Elsevier, 2015-10-27)
    There is an increasing need to eliminate wasted time and money during factory layout design and subsequent construction. It is presently difficult for engineers to foresee if a certain layout is optimal for work and material ...
  • McAndrew, Anthony; Colegrove, Paul A.; Buhr, Clement (Taylor & Francis, 2016-12-05)
    Linear friction welding (LFW) is a solid-state joining process that significantly reduces manufacturing costs when fabricating Ti–6Al–4V aircraft components. This article describes the development of a novel 3D LFW process ...
  • Algarni, Namshan; McLaughlin, Patrick; Al-Ashaab, Ahmed (BMJ, 2018-10-31)
    In order to improve leadership performance and enhance effective leadership in the healthcare sector organisations in general and the KSA in particular, this study proposes a theoretical framework to address the way in ...
  • Joshi, Siddharth; Rawat, Krishna; Karunakaran, C.; Rajamohan, Vasudevan; Mathew, Arun Tom; Koziol, Krzysztof; Kumar Thakur, Vijay; Balan, A.S.S (Elsevier, 2019-10-16)
    The concept of 4D printing is its formation of complex three-dimensional structures that have the ability to adopt different shapes and forms when subjected to different environmental stimuli. A few researchers simply view ...
  • Tian, Yong; He, Xiuqi; Xu, Yan; Wan, Lili; Ye, Bojia (IEEE, 2020-03-31)
    For the current development of green civil aviation, this study aims to optimize the green four-dimensional (4D) trajectory of commercial flight by taking into account conventional cost and environmental cost. Some fundamental ...
  • Amaro Carmona, Manuel Angel (Cranfield University, 2015-10)
    This thesis describes a 4D Trajectories Generator and Guidance system. 4D trajectory is a concept that will improve the capacity, efficiency and safety of airspace. First a 4D trajectories synthetizer design is proposed. ...
  • Mohd Saad, Norhairin; Al-Ashaab, Ahmed; Maksimovic, Maksim; Zhu, L.; Shehab, Essam; Ewers, P.; Kassam, A. (Springer, 2013-03-01)
    Problem solving is a crucial skill in product development. Any lack of effective decision making at an early design stage will affect productivity and increase costs and the lead time for the other stages of the product ...
  • Jadhav, Swati; He, Hongmei; Jenkins, Karl W. (2017-05-31)
    With the development of Internet techniques, data volumes are doubling every two years, faster than predicted by Moore’s Law. Big Data Analytics becomes particularly important for enterprise business. Modern computational ...
  • Mgbemena, Chinedum Ogonna; Li, Danning; Lin, Meng-Fang; Liddel, Paul Daniel; Katnam, Kali Babu; Kumar, Vijay Thakur; Nezhad, Hamed Yazdani (Elsevier, 2018-09-12)
    Accelerated curing of high performance fibre-reinforced polymer (FRP) composites via microwave heating or radiation, which can significantly reduce cure time and increase energy efficiency, has several major challenges ...
  • Abir, Jonathan; Morantz, Paul; Longo, Stefano; Shore, Paul (European Society for Precision Engineering and Nanotechnology, 2016-06-30)
    A novel concept for improving machine dynamic performance was developed and realised, a virtual metrology frame, for a small size CNC machine with flexible frame. Its implementation in a simplified linear motion system ...
  • Dorn, Lisa; af Wåhlberg, Anders E. (Taylor and Francis, 2020-04-19)
    It is argued that the reason that previous evidence apparently did not support the accident proneness hypothesis was faulty methodology and erroneous interpretations of results. Between time periods correlations of traffic ...
  • Skaf, Zakwan; Zaidan, Martha A.; Harrison, Robert F.; Mills, Andrew R. (PHM Society, 2013-10-08)
    Elements of gas turbine degradation, such as compressor fouling, are recoverable through maintenance actions like compressor washing. These actions increase the usable engine life and optimise the performance of the gas ...
  • Fotouhi, Abbas; Auger, Daniel J.; Propp, Karsten; Longo, Stefano (IEEE, 2016-09-22)
    This paper presents a framework for battery modeling in online, real-time applications where accuracy is important but speed is the key. The framework allows users to select model structures with the smallest number of ...
  • Smith, Chrissy; Pachidis, Vassilios; Castillo Pardo, Alejandro; Gires, Ezanee; Stevens, Jos; Thevenot, Laurent; d'Ippolito, Roberto (2015-12-31)
    This paper describes the work done and strong interaction between Cranfield University as member of the Technology Evaluator (TE) team , Green Rotorcraft (GRC) Integrated Technology Demonstrator (ITD) ...
  • Li, Wen-Chin; Greaves, Matthew J.; Durando, D.; Lin, J.J. (Aeronautical and Astronautical Society of the Republic of China, 2016-09-01)
    Cockpit automation has been developed to reduce pilots' workload and increase pilots' performance. However, previous studies have demonstrated that failures of automated systems have significantly impaired pilots' situational ...

Search CERES


Browse

My Account