Browsing Cranfield Conferences by Title

Browsing Cranfield Conferences by Title

Sort by: Order: Results:

  • Martin, J. (School of Water Sciences, Cranfield University, 1999-03-03)
    The use of the activated sludge process is a very well known technology. It is and has been used very widely in full scale plants from its first development at the Davyhulme works in Manchester. However this process ...
  • Ranzo, P.; Sbordone, M. A.; Veneziano, R. (Cranfield University Press, 2009-04-01)
    The paper aims to describe a design methodology in design strategy and design services sectors, it highlights the importance of designing new models of production and distribution in the fashion driven sector. In complex ...
  • Tseng, Kevin C; Chien-Lung, Hsu (Cranfield University Press, 2013-09-19)
    In this study, we summarise the requirements for collaborative product development based on our investigation of the differences in the resources and tools that are needed for the various stages of collaborative product ...
  • Hasan, Reaz; Baddage, S; Perera, Noel; Persson, Martin (Cranfield University Press, 2013-09-19)
    The paper describes a methodology to determine the heating mechanism of steel wire inside a tube furnace used for annealing. The approach is based on Lumped Heat Capacity method of heating where the ‘surface heat transfer ...
  • Kelly, Andrew; Impey, Sue; Mitsev, Petar; Nicholls, John (Cranfield University Press, 2013-09-19)
    In recent years, automotive emissions legislation has been introduced and is rapidly becoming more stringent. With alternative vehicular propulsion methods far from becoming mainstream reality, leading automotive providers ...
  • Foeken, M. J.; van Tooren, M. J. L. (Cranfield University Press, 2009-03-31)
    The automated development of control software for mechatronic systems requires the integration of control models for design and verification purposes. To obtain high-fidelity models, unintended behaviour of the system ...
  • Romero Rojo, Francisco Javier; Roy, Rajkumar; Shehab, Essam; Wardle, P. J. (Cranfield University Press, 2009-04-01)
    The aerospace and defence industries are moving towards new types of agreement such as availability contracts based on Product-Service System (PSS) business models. Obsolescence has become one of the main problems that ...
  • Alvarez Cabrera, A. A.; Erden, M. S.; Tomiyama, Tetsuo (Cranfield University Press, 2009-03-31)
    Current mechatronic products tend to be very complex systems. A design team is necessary to develop such products, and appropriate modeling and design support tools are essential to aid the design team. The Automatic ...
  • Chantzis, Dimitrios; Salonitis, Konstantinos; Paralikas, John; Chryssolouris, George (Cranfield University Press, 2013-09-19)
    The European automotive industry is known world-wide as the technically most advanced and innovative. Based on the competitiveness of global market, it is an emerging challenge and puts forward the need of flexibility for ...
  • Cantwell, A. D. C. (School of Water Sciences, Cranfield University, 1996-06-12)
    This paper reports on the performance of the BiobeadTM version of the Biological Aerated Flooded Filter Process over the last few years. More than twenty of these units have been installed in the U.K. and the operating ...
  • Budge, F.; Gorrie, D. (School of Water Sciences, Cranfield University, 1996-06-12)
    Halcrow Scotland were appointed by Grampian Regional Council (now North of Scotland Water Authority) in April 1993 to carry out the Aberdeen Wastewater Treatment Feasibility Study. The study started with a verification ...
  • Rojas-Salgado, A. A.; Ledezma-Rubio, Y. A. (Cranfield University Press, 2009-03-31)
    In most existing studies, the solutions of planar parallel manipulators are restricted to a feasible region of solution. This research provides an optimal solution in link dimension of planar parallel manipulators to a ...
  • Smith, A. J.; Brignal, W. B. (School of Water Sciences, Cranfield University, 1996)
    Legislation requiring the first time treatment of coastal wastewater discharges and the uprating of existing treatment plant to meet tighter quality standards has led to the introduction of the Biological Aerated Filter ...
  • Tahir, Waseem; Jaffery, Husain; Ali, Liaqat; Khan, Mushtaq; Butt, Shahid; Jaffery, Mehdi (Cranfield University Press, 2013-09-19)
    In this research, liquid Argon is used as a cryogenic media to optimize the cutting parameters for evaluation of tool flank wear width of Tungsten Carbide Insert (CNMG 120404-WF 4215) while turning high strength alloy ...
  • Osman, Muhammed; Case, Keith; Watts, Darren (Cranfield University Press, 2013-09-19)
    This paper presents a method for optimizing roughing operations in CNC machining particularly for parts production through a subtractive rapid manufacturing process. The roughing operation in machining is primarily used ...
  • Nouara, Adel; DeCoster, Rebecca (Cranfield University Press, 2013-09-19)
    Oil operations involve high levels of capital equipment and high capacity production processes for which performance measures can assist with monitoring production throughout the oil industry stages. The approach taken in ...
  • Meselhy, K. T.; ElMaraghy, W. H.; ElMaraghy, H. A. (Cranfield University Press, 2009-04-01)
    The maintenance policy in manufacturing systems is devised to reset the machines functionality in an economical fashion in order to keep the products quality within acceptable levels. Therefore, there is a need for a ...
  • Brewer, Peter (of Water Sciences, Cranfield University, 1996-06-12)
    1. The town of Poole in south east Dorset has undergone substantial development during the 1980's. Wessex Water recognised the pressure on the water services in this region and commissioned a strategy study for this ...
  • Schneider, Ulrich; Drust, Manuel; Diaz Posada, Julian; Verl, Alexander (Cranfield University Press, 2013-09-19)
    A series of mechanical properties and disturbances limit the accuracy achievable in robotic applications. External control of the end effector position is commonly known as being an appropriate mean to increase accuracy. ...
  • Baines, Tim S.; Lightfoot, Howard (Cranfield University Press, 2009-04-01)
    Servitization is now widely recognised as the process of creating value by adding services to products. Since this term was first coined in the late 1980s it has been studied by a range of authors who have specifically sought ...

Search CERES


Browse

My Account