Browsing Cranfield Conferences and Symposia by Title

Browsing Cranfield Conferences and Symposia by Title

Sort by: Order: Results:

  • Meteorological Wind Effect on the Ballistic Trajectory of a Medium Calibre System 
    Knight, Daniel (Cranfield University, 2020-12-02)
    Modern systems use a single wind sensor onboard the vehicle to measure and capture meteorological wind data to calculate a weapon systems ballistic offset. The most calculations assumes constant wind between firing point ...
  • Method Development for Compression Testing of Synthetic Ballistic Gelatine 
    Clarke, Emma (Cranfield University, 2024-01-22)
    Poster contribution to the Defence and Security Doctoral Symposium 2023 
  • A Method of Analyzing Complexity by Effects and Rapid Acquisition of the Most Ideal Solution Based on TRIZ 
    Zhang, P.; Liu, F.; Zhang, D. R.; Tan, R. H. (Cranfield University Press, 2009-03-31)
    Presently, designers could only use definitions in the complexity theory to analyze the complex problems in the system. In the article, a new method is put forward which is the method of analyzing complexity by effects and ...
  • A Method of Supporting Conflict Resolution for Designing Services 
    Akiyama, Y.; Shimomura, Y.; Arai, T. (Cranfield University Press, 2009-04-01)
    Recently, the importance of service has been emphasized in various industries. However, few studies have focused on service design in spite of its great relevance. This paper proposes a methodology for service design, which ...
  • A Method to Analyze PSS from the Viewpoints of Function, Service Activity, and Product Behavior 
    Hara, T.; Arai, T.; Shimomura, Y. (Cranfield University Press, 2009-04-01)
    As our economy matures, combination of tangible products and intangible services becomes a key issue toward a harmonious balance with economic growth and environment conscious. This paper aims to present a method for ...
  • A Methodology for Variability Reduction in Manufacturing Cost Estimating in the Automotive Industry based on Design Features 
    Romero Rojo, Francisco Javier; Roy, Rajkumar; Shehab, Essam (Cranfield University Press, 2009-03-31)
    Small to medium manufacturing companies are coming to realise the increasing importance of performing fast and accurate cost estimates at the early stages of projects to address customers’ requests for quotation. However, ...
  • A Methodology of Persona-centric Service Design 
    Hosono, S.; Hasegawa, M.; Hara, T.; Shimomura, Y.; Arai, T. (Cranfield University Press, 2009-03-31)
    In order to clarify the customer’s inclination and provide them with better services, the persona-scenario method has been accepted in Requirements Engineering. A CAD tool proposed in Service Engineering also adopts ...
  • Methodology to Support the Generation of Firearm Obliteration Profiles 
    Henwood, Bailey (Cranfield University, 2022-11-24)
    It is commonly known that the removable of markings on a firearm can reduce the traceability by anonymising each weapon, however we do not currently have an understanding on how the location in which the obliteration is ...
  • Metrological characteristics of an on-machine tool optical measuring system 
    Bissacco, Guiliano; Liltorp, Klaus; Nedrehagen, Ivan; Svinning, Øystein; Nielsen, Nicolaj Elias; Kruse, Christian Wissing; Shaheen, Amrozia (Cranfield University, 2022-11-08)
    Metrological characterisation is a fundamental step towards assuring the traceability of a measuring instrument; particularly challenging for non-contact optical imaging systems due to the inadequacy of a specific reference ...
  • Microarchitectural profiling of aging bone with depth 
    Davies, Sammie (Cranfield University, 2019-11-19)
    Bone is a highly adaptive material and is known to change its structure and composition in times of disuse or overuse [1]. These periods can determine the microarchitecture of bone. This is evident when comparing the ...
  • Microstructure and Mechanical Properties of Inconel 718 and Inconel 625 Produced Through The Wire + Arc Additive Manufacturing Process 
    James, William (Cranfield University, 2022-01-12)
    In developing the wire + arc additive manufacturing (WAAM) process for heat resistant alloys used in high-speed flight applications, structures were built from nickel-based superalloys Inconel 718 (IN718) and Inconel 625 ...
  • Mixed-model production system design for aircraft assembly 
    Briggs, James; Jin, Yan; Price, Mark; Burke, Robert (Cranfield University Press, 2013-09-19)
    With the advancement of flexible fixture and flexible tooling, mixed production has become possible for aircraft assembly as the manufacturing processes of different aircraft/sub-assembly models are similar. However, due ...
  • Modelling Biological Aerated Filters for wastewater treatment 
    Mann, Allan T.; Stephenson, Tom (School of Water Sciences, Cranfield University, 1996-06-12)
    1. Biological aerated filters (BAFs) are submerged three-phase fixed media reactors for wastewater treatment. A major characteristic of BAF reactors is the use of granular media which allows solids separation as well as ...
  • Modelling long term digital preservation costs: a scientific data case study 
    Shehab, Essam; Lefort, Alice; Badawy, Mohamed; Baguley, Paul; Turner, Christopher J.; Wilson, Michael; Conway, Esther (Cranfield University Press, 2013-09-19)
    In recent years there has been increasing UK Government pressure on publicly funded researchers to plan the preservation and ensure the accessibility of their data for the long term. A critical challenge in implementing a ...
  • Modelling Product and Partners Network Architectures to Identify Hidden Dependencies 
    Zouggar, S.; Zolghadri, M.; Girard, P. (Cranfield University Press, 2009-03-31)
    This paper explores mutual dependencies between partners of a New Product Design (NPD) project during the realization phase. It highlights bidirectional influences between components and partners. Linking product and ...
  • Modelling the effects of temperature-dependent material properties in shear melt layers 
    Timms, Robert (Cranfield University, 2016-12-08)
    Technical paper presented at the 2016 Defence and Security Doctoral Symposium. This paper won second place in the Technical Paper category. The mechanisms responsible for ignition of explosive materials in response to low ...
  • Modelling the Product Development performance of Colombian Companies 
    Herrera-Hernandez, M. C.; Luna, C.; Prada, L.; Berdugo, C.; Al-Ashaab, Ahmed (Cranfield University Press, 2009-03-31)
    This paper presents the general model of the Product Development Process (PDP) in the Metal mechanics Industry in Barranquilla-Colombia, since this sector contributes significantly to the productivity of this industrial ...
  • Modelling Ultraviolet Missile Seekers 
    James, Itor (Cranfield University, 2017-01-11)
    3MT presentation at the 2016 Defence and Security Doctoral Symposium. Surface to Air Missile (SAM) seekers are beginning to make use of wavebands other than the traditional Infrared (IR).  One of the wavebands they are ...
  • A modification of P-diagram for the robust design of product service system 
    Wang, Hanfei; Mitake, Yuya; Alfarisi, Salman; Shimomura, Yoshiki (Cranfield University, 2022-11-08)
    For product-service system (PSS), it is critically important whether PSS could fulfil the requirement of customers. However, in the real business environment, multiple perturbations or noises might happen to weaken the ...
  • A modified AHP algorithm for network selection 
    Huang, Xin; Jules, Guiovanni; Saadat, Mozafar; Rakhodaei, Hamid (Cranfield University Press, 2013-09-19)
    This paper addresses the concept of ranking networks to the multiple criteria of customers to find the best and alternative networks. The use of modified AHP algorithm has been shown to provide better network ranking for ...

Search CERES


Browse

My Account