JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Hancock, P. | - |
| dc.contributor.author | Nicholls, John R. | - |
| dc.contributor.author | Mahmood, K. | - |
| dc.date.accessioned | 2011-07-12T12:02:33Z | |
| dc.date.available | 2011-07-12T12:02:33Z | |
| dc.date.issued | 1993-01-01T00:00:00Z | - |
| dc.identifier.citation | P. Hancock, J.R. Nicholls, K. Mahmood, The influence of imposed strain rate on fracture of surface oxides, Corrosion Science, Volume 35, Issues 5-8, Advances in Corrosion and Protection, 1993, Pages 979-981, 983-987 | en_UK |
| dc.identifier.issn | 0010-938X | - |
| dc.identifier.uri | http://dx.doi.org/10.1016/0010-938X(93)90316-9 | - |
| dc.identifier.uri | http://dspace.lib.cranfield.ac.uk/handle/1826/3090 | |
| dc.description.abstract | The mechanical properties of chromium rich scales formed on 304 stainless steel have been investigated as a function of deformation rate and operating temperature. At 900C at slow strain rates < 10-6 per second no cracking was observed at strains up to 10%. At rapid strain rates in excess of 10-4 per second oxide cracking was found to be independent of strain rate and controlled by the fracture toughness of the oxide. In the intermediate region, with strain rates between 10-4 per second and 10-6 in the temperature range 700 to 950C, the behaviour is determined by the creep deformation and fracture mode of the oxide. The mechanism of surface oxide failure is examined and an equation to predict cracking density over the full range of both monotonic tensile and creep fracture modes is sugg | en_UK |
| dc.language.iso | en_UK | en_UK |
| dc.publisher | Elsevier Science B.V., Amsterdam. | en_UK |
| dc.rights | NOTICE: this is the author’s version of a work that was accepted for publication in Corrosion Science. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Corrosion Science, VOL 35, ISS 5-8(1993) DOI:10.1016/0010-938X(93)90316-9 | |
| dc.title | The influence of imposed strain rate on fracture of surface oxides. | en_UK |
| dc.type | Article | en_UK |
Files in this item
This item appears in the following Collection(s)
-
Staff publications (SAS) [907]