Citation:
G. A. Richardson, W. N. Dawes and A. M. Savill. An unsteady, moving mesh CFD
simulation for Harrier hot-gas ingestion control analysis. The Aeronautical
Journal, March 2007, pp.133-144
Abstract:
Hot gas ingestion (HGI) can be a problematic feature of short take-off vertical
landing (STOVL) aircraft during the descent phase of landing, or while on the
ground. The hot exhaust gases from the downwards pointing nozzles can be re-
ingested into the engine intakes, causing power degradation or reduced engine
surge margin. The flow-fields that characterise this phenomenon are complex,
with supersonic impinging jets and cross-flows creating large ground vortices
and fountain up-wash flows. A flow solver has been developed to include a
suitable linear mesh deformation technique for the descending aircraft
configuration. The code has been applied to predict the occurrence of HGI, by
simulating experimental results from a 1/15th scale model of a descending
Harrier. This has enabled an understanding of the aerodynamic mechanisms that
govern HGI, in terms of the near-field and far-field effects and their impact on
the magnitude of temperatures at the engine intake. This paper presents three
sets of CFD results. First a validation exercise shows predicted results from
the twin-jet with intake in crossflow test-case. This is an unsteady Reynolds
averaged Navier Stokes (URANS) solution for a static geometry (there is no
moving mesh). This allows comparison with experiment. Secondly, a full descent
phase URANS Spalart-Allmaras (SA) turbulence model calculation is done on an
8⋅5m cell mesh for half the flow domain of the Harrier model and test-rig
without dams/strakes. This shows how the HGI flow mechanisms affect the engine
intake temperature profiles, for the case where there are no flow control
methods on the underside of the aircraft. Thirdly, the full descent phase URANS
SA turbulence model calculation is done on a 22⋅4m cell mesh for the full flow
domain of the Harrier model and test-rig, with the dam/strake geometry included
in the structured mesh region. NOMENCLATURE ADF advanced data format ATV
advanced technology viewer CFD computational fluid dynamics DARP Defence
Aerospace Research Partnership DTI Department of Trade and Industry FOD foreign
object debris hexa hexahedral HGI hot-gas ingestion HPCx high performance comp