Browsing Staff publications (SAS) by Title

Browsing Staff publications (SAS) by Title

Sort by: Order: Results:

  • Magnetic ion-exchange resin treatment: Impact of water type and resin use 
    Mergen, Maxime Rodolphe Denis; Jefferson, Bruce; Parsons, Simon A.; Jarvis, Peter (Elsevier Science B.V., Amsterdam., 2008-04-30)
    Three raw waters of fundamentally different natural organic matter (NOM) character were treated by magnetic resin using a bench-scale method designed to mimic how the resin is used in continuous operation. Increasing ...
  • Managing Information Flows for Product-Service Systems Delivery 
    Durugbo, Christopher; Tiwari, Ashutosh; Alcock, Jeffrey R. (2010-04-15)
    The delivery phase is an integral part of the product-service system (PSS) approach that requiresinteractions involving the external and internal flow of information. Managing information flows for a companythat adopts ...
  • Manufacturing knowledge verification in design support systems 
    Cochrane, Sean; Young, R.; Case, K.; Harding, J.; Gao, James X.; Dani, S.; Baxter, David (Taylor & Francis, 2009-12-01)
    This paper identifies the need for a verification methodology for manufacturing knowledge in design support systems; and proposes a suitable methodology based on the concept of ontological commitment and the PSL ontology ...
  • The mapping of landscapes, geology and soils of Bedfordshire & Cambridgeshire 
    Farewell, Timothy S.; Friend, Peter; Whiteley, Martin; Zawadzka, Joanna (2011-12-08)
    Landscapes and their component landforms have formed during the long-term geological history of an area, and may have been influenced by many factors. These include, a) the materials present just below the Earth's surface, ...
  • Material characterisation and calibration of a meso-mechanical damage model for braid reinforced composites 
    Pickett, Anthony K.; Fouinneteau, M. R. C. (Elsevier Science B.V., Amsterdam., 2006-02-01)
    Cost effective braid reinforced composites are a potential substitute for metals in many automotive structural applications where good mechanical performance combined with high energy absorption are of special interest. ...
  • Material constitutive behaviour and microstructure study on aluminium alloys for friction stir welding 
    Wang, H.; Colegrove, Paul A.; Mayer, H. M.; Campbell, L.; Robson, R. D. (2010-01-31)
    The material constitutive behaviour and microstructure of Aluminium alloys 6082 and 7449 were studied with the Gleeble hot compression test. The novel aspect of the work is that the testing was done at high strain-rates ...
  • Measurement and modelling of the transient thermal-mechanical strain field during GMA welding 
    Coules, Harry E.; Cozzolino, Luis D.; Colegrove, Paul A.; Wen, S. W. (2011-04-07)
    The state of residual stress in welded joints is a well-studied topic, and many methodsof residual stress measurement are now available. However, far less is known aboutthe transient strains which occur during the welding ...
  • Measuring Floc Structural Characteristics 
    Jarvis, Peter; Jefferson, Bruce; Parsons, Simon A. (Springer, 2005-05)
    A review is presented of a range of techniques for the structural characterisation of flocs. Flocs may be considered as highly porous aggregates composed of smaller primary particles. The irregular size and shape of flocs ...
  • Measuring the process efficiency of controlled gas metal arc welding processes 
    Pepe, Nuno; Egerland, Stephan; Colegrove, Paul A.; Yapp, David; Leonhartsberger, Andreas; Scotti, Ameirico (2011-07-31)
    The thermal or process efficiency in gas metal arc welding (GMAW) is a crucial input to numerical models of the process and requires the use of an accurate welding calorimeter. In this paper, the authors compare a liquid ...
  • Measuring, modeling and mapping ecosystem services in the Eastern Arc Mountains of Tanzania 
    Fisher, Brendan; Turner, R. Kerry; Burgess, Neil D.; Swetnam, Ruth D.; Green, Jonathan; Green, Rhys; Kajembe, George; Kulindwa, Kassim; Lewis, Simon L.; Marchant, Rob; Marshall, Andrew R.; Madoffe, Seif; Munishi, P. K. T.; Morse-Jones, Sian; Mwakalila, Shadrack; Paavola, Jouni; Naidoo, Robin; Ricketts, Taylor; Rouget, Rouget; Willcock, Simon; White, Sue; Balmford, Andrew (V.H. Winston & Son, Inc., 2011-10-31)
    In light of the significance that ecosystem service research is likely to play in linking conservation activities and human welfare, systematic approaches to measuring, modeling and mapping ecosystem services (and their ...
  • Mechanical behaviour of DNA molecules-Elasticity and migration. 
    Benke, Matyas; Shapiro, Evgeniy; Drikakis, Dimitris (Elsevier Science B.V., Amsterdam., 2011-09-30)
    A novel multi-scale simulation method developed to describe mesoscale phenomena occurring in biofluidic devices is presented. The approach combines the macro-scale modelling of the carrier fluid and the micro-scale description ...
  • Mechanical properties balance in novel Z-pinned sandwich panels: out-of-plane properties. 
    Marasco, Andrea I.; Cartié, Denis D. R.; Partridge, Ivana K.; Rezai, Amir (Elsevier Science B.V., Amsterdam., 2005-04-18)
    The paper presents the first complete set of test results obtained from quasi- static measurements of the out-of-plane tension, shear and compression properties of novel XCor ™ and K-Cor™ flat sandwich panels. The cured ...
  • Mechanical sludge disintegration for the production of carbon source for biological nutrient removal. 
    Kampas, Pantelis; Parsons, Simon A.; Pearce, P.; Ledoux, S.; Vale, P.; Churchley, J.; Cartmell, Elise (Elsevier, 2007-04)
    The primary driver for a successful biological nutrient removal is the availability of suitable carbon source, mainly in the form of volatile fatty acids (VFA). Several methods have been examined to increase the amount of ...
  • A Mechanism for the Erosion of EB PVD TBCS 
    Wellman, R. G.; Nicholls, John R. (Trans Tech Publications, Switzerland., 2000-07-10)
    Since the introduction of electron beam (EB) physical vapour deposition (PVD) TBCs and their application to moving components in the hot gas stream, erosion has become a prime concern. This project has been involved in ...
  • Mechanisms leading to post-supply water quality deterioration in rural Honduran communities 
    Trevett, Andrew F.; Carter, Richard C.; Tyrrel, Sean F. (Elsevier, 2005-05-13)
    Drinking water can become contaminated following its collection from communal sources such as wells and tap stands, as well as during its storage in the home. However, the mechanisms leading to contamination between the ...
  • Media surface properties and the development of nitrifying biofilms in mixed cultures for wastewater treatment. 
    Stephenson, Tom; Reid, E.; Avery, L. M.; Jefferson, Bruce (Institute of Chemical Engineers, 2013-07-01)
    Plastic was tested to select biofilm support media that would enhance nitrification in the presence of heterotrophs. Eight different types (acrylonitrile butadiene styrene, nylon, polycarbonate, polyethylene, polypropylene, ...
  • Meeting report: risk assessment of tamiflu use under pandemic conditions 
    Singer, Andrew C.; Howard, Bruce M.; Johnson, Andrew C.; Knowles, Chris J.; Jackman, Simon; Accinelli, Cesare; Caracciolo, Anna Barra; Bernard, Ian; Bird, Stephen; Boucard, Tatiana; Boxall, Alistair; Brian, Jayne V.; Cartmell, Elise; Chubb, Chris; Churchley, J.; Costigan, Sandra; Crane, Mark; Dempsey, Michael J.; Dorrington, Bob; Ellor, Brian; Fick, Jerker; Holmes, John; Hutchinson, Tom; Karcher, Franz; Kelleher, Samuel L.; Marsden, Peter; Noone, Gerald; Nunn, Miles A.; Oxford, John; Rachwal, Tony; Roberts, Noel; Roberts, Mike; Sacca, Maria Ludovica; Sanders, Matthew; Straub, Jürg Oliver; Terry, Adrian; Thomas, Dean; Toovey, Stephen; Townsend, Rodney; Vouivoulis, Nikolaos; Watts, Chris (Nat Inst of Environ Health Sciences / The National Institute of Environmental Health Sciences (NIEHS), 2008-11-30)
    On 3 October 2007, 40 participants with diverse expertise attended the workshop Tamiflu and the Environment: Implications of Use under Pandemic Conditions to assess the potential human health impact and environmental ...
  • Membrane Gas Absorbers for H2S Removal - Design, Operation and Technology Integration into Existing Odour Treatment Strategies. 
    Jefferson, Bruce; Nazareno, C.; Georgaki, S.; Gostelow, P.; Stuetz, Richard M.; Longhurst, Philip J.; Robinson, T. (Taylor & Francis, 2005-07-01)
    A hollow fibre (HF) polypropylene membrane gas absorber was investigated for the removal of hydrogen sulphide (H2S) from gas streams. Gas concentrations between 25-2010 ppmV were fed into the shell side of a membrane ...
  • Membrane life estimation in full-scale immersed membrane bioreactors 
    Ayala, D. F.; Ferre, V.; Judd, Simon J. (Elsevier Science B.V., Amsterdam., 2011-08-15)
    Limited quantitative available information exists regarding the robustness of membranes used in immersed membrane bioreactor (iMBR) applications, and no information on the relative contribution of the two main membrane ...
  • Menstrual management: a neglected aspect of hygiene interventions 
    Parker, Alison H.; Smith, Jennifer A.; Verdemato, Tania; Cooke, Jeanette; Webster, James; Carter, Richard C. (Emerald Group Publishing Limited, 2014-12-31)
    Purpose - Effective menstrual management is essential for the mental and physical well being of women. However, many women in low-income countries lack access to the materials and facilities required. They are thus restricted ...

Search CERES


Browse

My Account