Investigation of productivity, energy efficiency, quality and cost for laser drilling

Date published

2020-10

Free to read from

Journal Title

Journal ISSN

Volume Title

Publisher

Cranfield University

Department

SATM

Type

Thesis or dissertation

ISSN

Format

Citation

Abstract

Laser drilling is a high speed, non-contact advanced machining process and has proven to be an important industrial process for producing cooling holes in various aeroengine components; in particular high-pressure turbine blades, combustor liners and nozzle guide vanes. However, an increase in the number of cooling holes demands the need for effective utilisation of laser drilling process capability. Material removal rate (MRR), specific energy consumption (SEC), hole taper and the drilling cost are the basic performance indicators to meet this goal. Hence, this research aims to examine the laser drilling process in terms of the mentioned performance measures. Taking into account the significance of material removal quantity, energy efficiency, product quality and manufacturing cost, this study is performed in the form of an experimental investigation for three laser drilling processes, namely, single-pulse drilling, percussion and trepanning. Two different laser drilling setups were prepared to produce holes in Inconel 718 superalloy sheets using flashlamp-pumped Nd:YAG laser and Quasi-CW fibre laser. This research contributes to an evaluation of the influence of laser drilling process parameters on the MRR, SEC, hole quality and drilling cost. Moreover, the performance of laser drilling methods has been compared in relation to the selected performance measures. To further understand the significance of laser sources, the performance of laser drilling was compared for the mentioned drilling setups. This research also introduced a detailed cost analysis to explore the economic implications of the laser drilling process. In addition, optimal drilling conditions were determined aiming to maximise the MRR and minimise hole taper and drilling cost.

Description

Software Description

Software Language

Github

Keywords

Laser drilling, Single-pulse, Percussion, Trepanning, Material removal rate (MRR), Specific energy consumption (SEC), Hole taper, Cost estimation, Optimisation

DOI

Rights

© Cranfield University, 2020. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright holder.

Relationships

Relationships

Supplements

Funder/s