Browsing School of Applied Sciences (SAS) (2006-July 2014) by Title

Browsing School of Applied Sciences (SAS) (2006-July 2014) by Title

Sort by: Order: Results:

  • Media surface properties and the development of nitrifying biofilms in mixed cultures for wastewater treatment. 
    Stephenson, Tom; Reid, E.; Avery, L. M.; Jefferson, Bruce (Institute of Chemical Engineers, 2013-07-01)
    Plastic was tested to select biofilm support media that would enhance nitrification in the presence of heterotrophs. Eight different types (acrylonitrile butadiene styrene, nylon, polycarbonate, polyethylene, polypropylene, ...
  • Meeting report: risk assessment of tamiflu use under pandemic conditions 
    Singer, Andrew C.; Howard, Bruce M.; Johnson, Andrew C.; Knowles, Chris J.; Jackman, Simon; Accinelli, Cesare; Caracciolo, Anna Barra; Bernard, Ian; Bird, Stephen; Boucard, Tatiana; Boxall, Alistair; Brian, Jayne V.; Cartmell, Elise; Chubb, Chris; Churchley, J.; Costigan, Sandra; Crane, Mark; Dempsey, Michael J.; Dorrington, Bob; Ellor, Brian; Fick, Jerker; Holmes, John; Hutchinson, Tom; Karcher, Franz; Kelleher, Samuel L.; Marsden, Peter; Noone, Gerald; Nunn, Miles A.; Oxford, John; Rachwal, Tony; Roberts, Noel; Roberts, Mike; Sacca, Maria Ludovica; Sanders, Matthew; Straub, Jürg Oliver; Terry, Adrian; Thomas, Dean; Toovey, Stephen; Townsend, Rodney; Vouivoulis, Nikolaos; Watts, Chris (Nat Inst of Environ Health Sciences / The National Institute of Environmental Health Sciences (NIEHS), 2008-11-30)
    On 3 October 2007, 40 participants with diverse expertise attended the workshop Tamiflu and the Environment: Implications of Use under Pandemic Conditions to assess the potential human health impact and environmental ...
  • Membrane Gas Absorbers for H2S Removal - Design, Operation and Technology Integration into Existing Odour Treatment Strategies. 
    Jefferson, Bruce; Nazareno, C.; Georgaki, S.; Gostelow, P.; Stuetz, Richard M.; Longhurst, Philip J.; Robinson, T. (Taylor & Francis, 2005-07-01)
    A hollow fibre (HF) polypropylene membrane gas absorber was investigated for the removal of hydrogen sulphide (H2S) from gas streams. Gas concentrations between 25-2010 ppmV were fed into the shell side of a membrane ...
  • Membrane life estimation in full-scale immersed membrane bioreactors 
    Ayala, D. F.; Ferre, V.; Judd, Simon J. (Elsevier Science B.V., Amsterdam., 2011-08-15)
    Limited quantitative available information exists regarding the robustness of membranes used in immersed membrane bioreactor (iMBR) applications, and no information on the relative contribution of the two main membrane ...
  • Menstrual management: a neglected aspect of hygiene interventions 
    Parker, Alison H.; Smith, Jennifer A.; Verdemato, Tania; Cooke, Jeanette; Webster, James; Carter, Richard C. (Emerald Group Publishing Limited, 2014-12-31)
    Purpose - Effective menstrual management is essential for the mental and physical well being of women. However, many women in low-income countries lack access to the materials and facilities required. They are thus restricted ...
  • Mesophilic anaerobic digestion monitoring using a headspace Carbon Dioxide method 
    Greggio, Ellen (Cranfield University, 2010-11)
    Anaerobic digesters are often not operated to full capacity and are recurrently subjected to adverse operational practices due to: temperature fluctuations, inconstant feeding regimes, variable solids content on the feed, ...
  • Mesoscopic Finite Element modelling of non-crimp fabrics for drape and failure analyses 
    Creech, G. (Cranfield University, 2006-04)
    To date, macroscopic analysis methods have been invariably used to analyse textile composite structures for forming and mechanical performance. Techniques such as geometric ‘mapping’ for the draping of textile fabrics ...
  • Metaldehyde and its relationship with groundwater contamination and landfill leachate 
    Bullock, Max (Cranfield University, 2014-06)
    Increasing attention is directed towards many chemicals and microbial constituents which have not been historically considered as contaminants. These “emerging contaminants” are commonly derived from municipal, agricultural ...
  • A metamodel to annotate knowledge based engineering codes as enterprise knowledge resources 
    Bermell-Garcia, Pablo (Cranfield University, 2007-04)
    The encoding of Knowledge Based Engineering (KBE) software applications is becoming a prominent tool for the automation of knowledge intensive tasks carried out using Computer Aided Design (CAD) technology. However, ...
  • Methane management in sewage treatment 
    Cookney, Joanna (Cranfield University, 2011-07)
    Poly-di-methyl-siloxane (PDMS) hollow fibre membrane modules were designed and built for the specific de-gassing of real and synthetic process liquids to understand: (i) the feasibility of operation; and (ii) classify the ...
  • Methane production, emission and control during MSW landfilling. 
    Barry, D. L.; Smith, Richard; Gregory, R. G.; Harries, C. (Eurowaste, 2003-10)
    Until quite recently the major emphasis on landfill gas control has related to ‘postcompletion’ of landfill cells or phases, rather than during active waste disposal operations. Increasingly, odour control needs have ...
  • Methanol dehydrogenase biofuel cells and enzyme-based electrodes 
    Aston, W. J. (Cranfield UniversitySchool of Applied Sciences, 1984-12)
    This thesis describes the linking of enzymes to electrodes and their application in biofuel cells and as analytical devices. Methanol dehydrogenase, an NAD independent enzyme was purified by two phase aqueous partition. ...
  • A Method to Support the Requirements Trade-Off of Integrated Vehicle Health Management for Unmanned Aerial Systems 
    Heaton, Andrew Edward (Cranfield University, 2014-07)
    he digital revolution in the latter part of the twentieth century has resulted in the increased use and development of Cyber-Physical Systems. Two of which are Unmanned Aerial Systems (UAS) and Integrated Vehicle ...
  • Methodological approach for the assessment of environmental effects of agroforestry at the landscape scale. 
    Palma, João H. N.; Graves, Anil R.; Burgess, Paul J.; Keesman, K. J.; van Keulen, Herman; Mayus, Martina; Reisner, Y.; Herzog, F. (Elsevier Science B.V., Amsterdam., 2007-04-01)
    Silvoarable agroforestry, the deliberate combined use of trees and arable crops on the same area of land, has been proposed in order to improve the environmental performance of agricultural systems in Europe. Based on ...
  • Methodology and theory evaluation of overall equipment effectiveness based on market 
    Anvari, Farhad; Edwards, Rodger; Starr, Andrew G. (Emerald Group Publishing Limited, 2010-12-31)
    Purpose - Continuous manufacturing systems used within the steel industry involve different machines and processes that are arranged in a sequence of operations in order to manufacture the products. The steel industry is ...
  • A methodology for cost and risk reduction in purchasing and supply management. 
    Younis, Kieron (Cranfield UniversitySAS, 2010-09)
    Automotive manufacturers in the UK and other industrialised nations face competitive pressures from rivals with lower underlying cost bases. Reducing costs and risks is of increasing importance, and purchasing and supply ...
  • A Methodology for Developing Web-based CAD/CAM Systems: Case Studies on Gear Shaper Cutters 
    Malahova, Anna (Cranfield University, 2014-06)
    The research establishes a methodology for developing Web-based CAD/CAM software systems to industrial quality standards in a time and cost e ective manner. The methodology de nes the scope of applicability, outlines ...
  • A methodology for shrinkage measurement in micro-injection moulding 
    Annicchiarico, Daniele; Attia, Usama M.; Alcock, Jeffrey R. (Elsevier Science B.V., Amsterdam., 2013-06-01)
    The aim of this paper is to provide a method for measuring shrinkage in micro injection moulded (μ-IM) parts - no standardised approach being reported as yet in the literature. This study investigates the feasibility of ...
  • A methodology for the concurrent design of products and their assembly sequence 
    Barnes , C. J. (Cranfield University, 1999)
    This thesis reports on the development of a Two-Tier methodology that provides support for assembly sequence construction, validation and evaluation in parallel with the design. This facilitates the production of products ...
  • A methodology for the distributed and collaborative management of engineering knowledge 
    Aziz, Hayder (2007-09)
    The problems of collaborative engineering design and management at the conceptual stage in a large network of dissimilar enterprises was investigated. This issue in engineering design is a result of ...

Search CERES


Browse

My Account