Browsing School of Engineering (SoE) by Title

Browsing School of Engineering (SoE) by Title

Sort by: Order: Results:

  • A hand anthropometric survey of British workers 
    Kember, Paul (Cranfield Institute of Technology, 1981-12)
    N/A
  • Handling track requirements 
    Ellis, J. R. (College of Aeronautics, 1963-09)
    Handling track requirements When the handling qualities of a vehicle are to be assessed, it is desirable that the test procedure enables the effects of the main vehicle parameters to be determined separately. The tests ...
  • Hazards awareness for aircraft accident investigators 
    Boston, Nathalie (Cranfield University, 2010)
    Hazards on accident sites are such that investigators must balance personal safety against the risks involved in collecting evidence intended to prevent future loss of life. Better knowledge of hazards and their mitigation ...
  • Hazards due to helicopter wakes 
    Kist, R. A. (1993)
    The local velocities induced in the wake of a helicopter can be a serious hazard to light aircraft operating nearby. A theoretical model is developed which makes it possible to estimate the rolling moment induced on a light ...
  • Heat and mass transfer behaviours of building materials and structures 
    Parra Saldivar, Maria Luisa (Cranfield University, 2005-03)
    Heat storage as a means to respond to the requirements for improved energy efficiency motivated this study. The objective was to evaluate the impact of thermal energy storage systems in dwellings under Mexican climatic ...
  • Heat and mass transfer regimes for room cooling and dehumidification using chilled water radiators 
    Hirayama, Y. (Cranfield University, 1998-02)
    The application of room radiators for the purposes of cooling and dehumidification in buildings for hot and humid climates is investigated. The radiator is purposely brought below the dew point temperature of the room ...
  • Heat conduction through a gas with one inert internal mode 
    Clarke, J. F. (College of Aeronautics, 1960-05)
    The rate of energy transfer between parallel flat plates is evaluated when the (stagnant) gas between them is polyatomic with one inert internal mode. Deviations of the thermal conductivity from the complete equilibriu ...
  • Heat exchanger design in a hot-water store 
    Mote, R. T. (Cranfield University, 1991-09)
    The behaviour of natural convective buoyancy-driven flows within a hot-water store due to the forced passage of colder water through the heat-exchanger's pipe are reviewed in the light of recent advances in experiment ...
  • Heat removal in axial flow high pressure gas turbine 
    Alhajeri, Hamad (Cranfield University, 2016)
    The demand for high power in aircraft gas turbine engines as well as industrial gas turbine prime mover promotes increasing the turbine entry temperature, the mass flow rate and the overall pressure ratio. High turbine ...
  • 'Heat transfer at low temperature in the entry section of a solid propellant rocket nozzle' 
    Smith, A. G. (College of Aeronautics, 1962-04)
    Heat transfer in the converging section of the nozzle of a simulated solid propellant rocket with a star-shaped conduit has been investigated in the following way: (a) Area-average heat transfer has been measured on a ...
  • Heat transfer characteristics of heat pipe heat exchangers for low and medium temperature heat recovery 
    Kang, Heeyoon (1997-07)
    Heat pipe heat exchangers (HPHEs) offer many advantages over other types of heat exchangers for the recovery of heat from industrial gaseous waste streams in the low and medium temperature ranges. Heat pipes employed in ...
  • Heat transfer from swirling impinging jets 
    Mahmood, M. (Cranfield University, 1980-04)
    This thesis is concerned with the determination of the local and average mass/heat transfer--from swirling jets impinging orthogonally onto flat surfaces. ApplicatioCn> of swirl alters the flow field of the' jet ...
  • Heat Transfer In Enclosures: Ovens 
    Ekundayo, C. O. (Cranfield University, 1994-12)
    The use of natural convection to effect heat transfers in enclosures is limited principally because of its low heat transfer coefficients. This study aimed to establish a better understanding of the heat transfers occurring ...
  • Heat transfer properties of porous materials and insulants 
    Batty, William J. (Cranfield University, 1984-03)
    Buildings are complex thermally-dynamic structures serving aesthetic as well as, utilitarian functions. It is essential that careful planning is undertaken if buildings are to be energy efficient and cheap to run ...
  • Heat transfer through an incompressible laminar boundary layer 
    Shah, V. L. (College of Aeronautics, 1962-09)
    The study of the boundary layer theory has been done by reviewing briefly the boundary layer concept, the boundary layer equations, and the exact solutions for wedge flow. All the methods for the calculations of the ...
  • Heat transfers from district heating pipes. 
    Neale, Antony John (Cranfield University, 1987-05)
    Experimental and numerical investigations were carried out on air-filled cavities containing heated inner cylinders. The effect of varying the position of radial spacers on a single cylinder was studied. It was concluded ...
  • Helicopter blade morphing strategies aimed at mitigating environmental impact | Strategie aktywnego kształtowania profilu łopat helikoptera w celu redukcji negatywnego wpływu ich pracy na środow 
    Pagano, Antonio; Ameduri, Salvatore; Cokonaj, Valerijan; Prachǎr, Ales; Zachariadis, Zacharias; Drikakis, Dimitris (Polish Society of Theoretical & Applied Mechanics, 2011-12-31)
    The requirement of mitigating the environmental impact of helicopters has been addressed globally within the FRIENDCOPTER Project in the sen- se that several aspects (such as noise abatement, vibration reduction, fuel ...
  • Helicopter crashworthiness: a chronological review of research related to water impact from 1982 to 2006 
    Hughes, Kevin; Campbell, James C. (American Helicopter Society Inc, 2008-06-02)
    This paper discusses in detail the contributions made in the field of water impact from 1982 to 2006 and provides a summaryof the major theoretical, experimental, and numerical accomplishments, up to and including the ...
  • Helix-simulation framework development for assessment of rotorcraft engines 
    Mohseni, Martina (Cranfield University, 2011-03)
    The inevitable growth of air traffic resulting from the increasing demands on utilization of the aircraft for various purposes has introduced public awareness and concern about the contribution of air traffic towards climate ...
  • A hierarchical approach to 3D non-parametric surface relief completion 
    Breckon, Toby P.; Fisher, Robert B. (Elsevier Science B.V., Amsterdam., 2012-01-01)
    Typical stereo and laser scan based 3D acquisition approaches are essentially limited to 2.5D capture. The resulting 3D completion problem, to derive missing information in 2.5D scenes from limited contextual information, ...

Search CERES


Browse

My Account