Effect of shielding conditions on bead profile and melting behaviour in laser powder bed fusion additive manufacturing

Abstract

A series of experiments were performed using a 500 W continuous wave fibre laser on a single powder bed layer using different processing variables. The aim was to investigate the effect of different shielding conditions on melting behaviour and bead profile in laser powder bed fusion (PBF). Through high-speed imaging, it was found that under an argon atmosphere a strong plasma plume is generated from the meltpool. Laser beam-plasma plume interactions caused strong instabilities during melting, including laser wandering, track instability and continuous fluctuations between melting regimes (conduction and keyhole). Hence, it was not possible to control the profile of the melted tracks under this condition. By using a helium atmosphere, a smaller plasma was obtained, reducing the disruptions caused by laser-plasma interactions. This led to a stable melting regime that allowed control of the melt bead profile. This condition was used to study the effect of laser-material fundamental interaction parameters on the bead geometry in powder bed melting. It was found that during melting of single tracks, the dominant regime of melting is conduction for the range of parameters tested. Penetration and melt width were found to increase with increasing energy density. For longer interaction times, melt widths were found to be up to ten times the size of the beam diameter used. Fluid flow modelling showed that this is due to strong melt flow as consequence of surface tension gradients generated by very high temperature gradients