dc.contributor.author | Righi, Mauro | |
dc.contributor.author | Ferrer-Vidal, Espana-Heredia Luis | |
dc.contributor.author | Pachidis, Vassilios | |
dc.date.accessioned | 2020-07-09T13:56:53Z | |
dc.date.available | 2020-07-09T13:56:53Z | |
dc.date.issued | 2020-07-07 | |
dc.identifier.citation | Righi M, Ferrer-Vidal LE, Pachidis V. (2020) Body-force and mean-line models for the generation of axial compressor sub-idle characteristics. The Aeronautical Journal, Volume 124, Issue 1281, November 2020, pp. 1683-1701 | en_UK |
dc.identifier.issn | 0001-9240 | |
dc.identifier.uri | https://doi.org/10.1017/aer.2020.58 | |
dc.identifier.uri | https://dspace.lib.cranfield.ac.uk/handle/1826/15544 | |
dc.description.abstract | This paper describes the application of low-order models to the prediction of the steady performance of axial compressors at sub-idle conditions. An Euler body-force method employing sub-idle performance correlations is developed and presented alongside a mean-line approach employing the same set of correlations. The low-order tools are used to generate the characteristic lines of the compressor in the locked-rotor and zero-torque windmilling conditions. The results are compared against steady-state operating points from three-dimensional (3D) Reynolds-averaged Navier–Stokes (RANS) computational fluid dynamics (CFD) simulations. The accuracy of the low-order tools in reproducing the results from high-fidelity CFD is analysed, and the trade-off with the computational cost of each method is discussed. The low-order tools presented are shown to offer a fast alternative to traditional CFD which can be used to predict the performance in sub-idle conditions of a new compressor design during early development stages | en_UK |
dc.language.iso | en | en_UK |
dc.publisher | Cambridge University Press | en_UK |
dc.rights | Attribution-NonCommercial 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/4.0/ | * |
dc.subject | CFD | en_UK |
dc.subject | Mean-line code | en_UK |
dc.subject | Through-flow code | en_UK |
dc.subject | Sub-idle performance | en_UK |
dc.subject | Axial compressor | en_UK |
dc.title | Body-force and mean-line models for the generation of axial compressor sub-idle characteristics | en_UK |
dc.type | Article | en_UK |
The following license files are associated with this item: