Designing a WAAM based manufacturing system for defence applications
Date
2015-10-09
Supervisor/s
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Department
Type
Article
ISSN
2212-8271
Format
Free to read from
Citation
Busachi A, Erkoyuncu J, Colegrove P, Martina F, Ding J. (2015) Designing a WAAM Based Manufacturing System for Defence Applications. Procedia CIRP, Volume 37, 2015, pp. 48-53
Abstract
Current developments in “Wire+Arc Additive Manufacturing” (WAAM) have demonstrated the suitability of the technology for rapid, delocalized and flexible manufacturing. Providing a defence platform with the ability of on-board WAAM capability, would give the platform unique advantages such as improved availability of its systems and ability to recover its capability after being subject to shock. This paper aims to investigate WAAM technology and define a WAAM based manufacturing system for In-platform applications.
Description
Software Description
Software Language
Github
Keywords
Wire +Arc Additive Manufacturing, Manufacturing Systems, Defence Platforms
DOI
Rights
Attribution 4.0 International (CC BY 4.0)
You are free to:
Share — copy and redistribute the material in any medium or format, Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Information:
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.