An inertial two-phase model of wax transport in a pipeline during pigging operations

Date published

2017-04-15

Free to read from

Supervisor/s

Journal Title

Journal ISSN

Volume Title

Publisher

Elsevier

Department

Type

Article

ISSN

0301-9322

Format

Citation

Boghi A, Brown L, Sawko R, Thompson CP. (2017) An inertial two-phase model of wax transport in a pipeline during pigging operations. International Journal of Multiphase Flow, Volume 94, September 2017, pp. 17-30

Abstract

Pig in pipelines performs operations for cleaning the pipe interior and internal inspection. In the past few years many 1D models have been developed to simulate the process because of their reduced computational cost; however, they rely on simplifications which are not always valid. In this paper, the results of a three-dimensional (3D) numerical investigation of the interaction between a waxy-oil and a dynamic sealing pig in a pipeline are presented. The results are obtained at a reduced computational cost by using a moving frame of reference, and an “injection” boundary condition for the wax deposited on the wall. The effect of the temperature and the wax particles’ size has been investigated. The 3D results show the structure assumed by the debris field in front of the pig. In particular, a lubrication region at the bottom of the pipe, whose dimensions are temperature dependent, is shown. This information cannot be deduced from 1D modeling. The influence of the oil on the mixture viscosity and the internal bed dynamics are discussed. This work provides insights into the interaction between the debris field in front of the pig and pipeline hydraulics.

Description

Software Description

Software Language

Github

Keywords

Piping, Oil, Deposition, Pipeline, Modeling

DOI

Rights

Attribution-NonCommercial-NoDerivatives 4.0 International

Relationships

Relationships

Supplements

Funder/s